 |
Astro Pneumatic 44 Piece Master Radio Removal Set AP 78444
• Set includes the following tools needed to install
and remove radios:
2 - Radio Removal U-Hooks (Ford/VW/Audi/Grundig/Blaupunkt)
1 - Special Pentagon Wrench (BMW)
4 - Radio Removal Keys (VW/Audi/Becker/Mercedes-Benz)
2 - Radio Removal Keys (Mercedes-Benz/Porsche/Becker)
2 - Radio Removal Keys (VW)
1 - Allen Hex Wrench (BMW/Opel)
2 - Radio Removal U-Hooks (New Blaupunkt)
6 - Radio Removal Keys (Mercedes-Benz/BMW)
2 - Radio Removal Keys (Kenwood II 1998-2001)
2 - Radio Removal Keys (Sony II ab 2002)
2 - Radio Removal Keys (Kenwood III ab 2002)
2 - Radio Removal Keys (Pioneer & JVC)
2 - Radio Removal Keys (Sony I bis 2005)
2 - Radio Removal Keys (Panasonic)
2 - Radio Removal Keys (Kenwood I bis 1998)
2 - Radio Removal Keys (Kenwood MASK)
2 - Radio Removal Keys (Clarion-New)
2 - Radio Removal Keys (Clarion (ALT))
2 - Radio Removal Keys (Panasonic 2006)
2 - Radio Removal Keys (Sony IDIC 2005)
|
 |
EZ-Red Monster Tailgate & Hood Holder EZRHH1000
• E-Z Red Monster Tailgate & Hood Holder
• Telescopes from 25" to 5 Feet!
• The only prop to hold sport utility or mini-van gates 100% open!
• Exclusive double locking system
• Guide channel insures button locking
• One of a kind hood holder
• Constructed of tubular aluminum
• Stores in most tool box drawers |
 |
Innovative Products of America 36 Pc. Tube Brush Set with Driver Handle INN8001D
Clean Head bolt holes, ports, guides, bushings and more.
• For use on any material
• 8mm through 19mm brushes
• 12 Steel/ 12 Nylon/ 12 Brass
• 1/4" Hex Shank for quick attachments using your power drill
• Twisted wires for increased cleaning function at lower speeds
• 1/4" Driver with quick lock adapter included for hand held use
|
 |
Kastar Hand Tools 11 Pc. Gasket Hole Punch Set KAS950
• Designed to cut holes and internal radii in gaskets and other soft material such as rubber, lead foil, linoleum, felt fiber and other similar materials.
Contains long driving mandrel. Ten punch sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1. |
 |
K-D Tools Remote Control Starter Switch KD 124
Use to bypass the ignition switch on any engine with a solenoid starter switch. The switch lets you crank the engine while working in the engine compartment. Switch is made of heavy-duty construction and has 32"-long leads. To use, connect from the positive battery terminal to the energizing terminal of solenoid. Use the switch for generator, starter, electrical, fuel pump and compression tests and for setting ignition points and adjusting tappets. 6 and 12 Volt use only. Wire rated capacity 8 amp. |
 |
Lisle Remote Starter LIS20750
• Tough, smooth-working reliable switch
• Heavy gauge, rubber-covered copper wire
• Depress button to job or start the engine
|
 |
Lisle Heavy-Duty Pedal Depressor for Clutch or Brakes LIS21520
• Heavy-duty contruction is strong enough to work on trucks but can be used on other vehicles too.
• Two piece telescoping shaft extends between the pedal and steering wheel (or seat front) and locks in place.
• Tools extends from 18-1/2" to 34-1/2"
|
 |
Lisle Fender Protector - Heavy Duty Vinyl LIS24750
Heavy, long wearing foam vinyl protect the car and provides convenient place for holding small tools and parts. |
 |
Lisle Power/Ground Outlet LIS32150
• Provides a Convenient Electrical Ground and Power Source from the Vehicle.
Plug the tool into the cigarette lighter or power accessory receptacle. You now have a ground and power source on the dash. The plug light will come on to signal the plug is properlyy connected and both power and ground are available at the posts. For power, connect to the positive (+) terminal. For electrical ground, attach ground wire from the instrument to be grounded to the negative (-) terminal. |
 |
Lisle Universal Gas-Charged Lift Support Clamp LIS44870
Holds weak gas-charged lift supports open on hoods, tailgates, hatchbacks and trunks. Clamp securely holds weak lift supports in the extended position to allow access to the engine compartment or luggage area. The aluminum body and brass threads prevent damage to the lift support. Colorful flag serves as reminder to remove clamp. |
 |
Lisle Hood Prop LIS45900
•Works on All Makes of Cars and Trucks
The three-piece, telescoping design allows the mechanic to hold the hood in the desired position. The tool telescopes from 18 1/2" to 46 3/4". Can be used from the side of car for better access to the engine compartment. Also great for body or repair work on door, trunk lids, or hatchbacks. |
 |
Lisle Engine Tilter for GM FWD Transverse Mounted Engines LIS48260
• Tilts and holds GM FWD Transverse Mounted Engines for repair.
• This tool attaches to the engine and engine mount to pull the engine foward. Makes servicing spark plugs, hoses, oxygen sensor, and ignition components much easier. Holds the engine safely in place during service. |
 |
Lisle Throttle Pedal Depressor LIS48700
• Holds throttle at constant RPM.
• Engage the nylon hook under the steering wheel. Then extend the depressor rod to the accelerator pedal. Use the adjusment screw to fine-tune the RPM level.
• Tool is 40" in overall lenght. |
 |
Lisle Window Holder LIS63900
Holds Door Glass While Working on Window Regulator.
• Works on all cars and trucks with a top door frame.
• Simply loop cable over door frame and attach suction cups to each side of glass.
• Window glass is then securely held above the door while work is performed.
|
 |
Tool Aid Truck/Van Wheel Step TA 19600
Use this portable "step" to access hard to reach places like engine compartments, van roofs and truck tops. Fits on the tire to provide added height. Will adjust to three positions vertically. Also has three positions for various wheel depths. Excellent for windshield repair work. For use on tires up to 9-1/2" wide. Step has special diamond pattern for extra traction and comfort. Easy to set up; folds for storage. |
 |
Tool Aid Steering Wheel Holder and Pedal Depressor TA 66400
• Holds the steering wheel, brake pedal, accelerometer or clutch pedal in a desired position
• Saves time and money by eliminating the need for two technicians to do the job
• Easy to assemble, install and release - components slide into position
• Locks in place by putting pressure against the seat
• Virtually 100% coverage to fitt all cars and trucks between seat and steering wheel, seat and pedal
• Coated to prevent slipping and marring
• Comes in a blow molded case with instructions |
 |
Tool Aid Door Spring Tool for GM Cars TA 87675
Use to remove and install the door hinge springs found on late model General Motors vehicles. Makes a hard job easy. Can be used with a 1/2" open end of ratcheting box wrench.
|
 |
Thexton Universal Hood/Tailgate Prop THE430
Clamps to weak gas cylinder lifts to hold up hood or tailgate. Won't damage cylinder rod. Eliminates clumsy sticks or props. |
 |
Thexton Door Buzzer Sanity Tool II THE445
• Designed for domestics and imports with door buzzer located on post behind front door.
• Eliminates irritating door buzzer.
• Spring steel with suction cup.
• Orange warning flag. |
 |
Thexton Door Buzzer Sanity Tool III THE466
• New tool silences irritating warning alarm switch located in door latch assembly of late model domestics and imports. Picks up where Sanity Tools I and II left off.
• Tool slides into door latch opening and closes switch.
• Allows working on vehicle with door open and key in ignition or headlights on.
• Steel tool has vinyl protective boot to prevent scratching finish if door is accidentally closed.
• Also has highly visible orange warning flag. |
 |
Thexton Door Buzzer Sanity Tool Kit THE469
• Kit contains three sure ways to reduce irritation and aggravation in the shop.
• Door Buzzer Sanity Tools I, II and III (Part Nos. 442, 445 and 466) handle alarm switches located on A and B pillars as well as door latch assemblies.
• All three tools allow technician to shut off warning system alarm when working with key in ignition and door open.
• Tools I and II use a spring design with suction cup and stepped button to shut off switch located on A or B pillars.
• Tool III works on domestics and imports with the switch located in the door latch assembly. |
 |
UView MiST™ Ultrasonic Cleaning Unit UV 590150
MiST™ In-Car Air Quality Service is a new and very effective way to treat the problem of mold, mildew and bacteria in a vehicle’s ventilation system.
The innovative technology utilizes a portable 12-volt ultrasonic unit that atomizes a specially formulated solution. Mist micro-droplets are drawn into an automobile’s vents, penetrating and treating the entire ventilation system, including evaporator, air ducts and passenger compartment surfaces. The result is a healthy solution that restores interior air quality, and effectively treats mold, mildew and bacteria as well as eliminating offensive odors.
With more and more people becoming aware of the problem hiding in their car’s ventilation system, the market is growing quickly for this innovative solution. The fifteen minute MiST service is recommended twice yearly for optimum protection on all automotive vehicles regardless of age or mileage. You can make it a profitable part of a prevention maintenance schedule for your customers.
If you’re looking for a healthy boost to your bottom line, then here’s a definite MiST opportunity!
• Cleaning Solution is required for use with MiST™ unit
• Optional Vent Clip Air Fresheners are recommended as a value added service option
|
 |
UView MiST™ Vent Clip: Citrus Air Freshener UV 590237
Clip-on vent. Fragrance leaves vehicle smelling clean and fresh. Optional Vent Clip Air Fresheners are recommended as a value added service option.
• Case of 12 standard pack
|
 |
UView MiST™ Vent Clip: Vanilla Air Freshener UV 590238
Clip-on vent. Fragrance leaves vehicle smelling clean and fresh. Optional Vent Clip Air Fresheners are recommended as a value added service option.
• Case of 12 standard pack
|
 |
UView MiST™ Cleaning Solution UV 590250
MiST service for vehicle interiors and ventilation system. Designed for exclusive use with MiST Ultrasonic unit
• Each bottle: 3.4oz. /100ml.
• Case of 12 standard pack
|
