 |
Anglo American Ratch-Cut Ratcheting Tubing Cutter ANGRC1125
• Unique ratcheting action allows user to cut pipes in tight spaces.
• Easy to use and lightweight.
• Perfect for use in
today's cramped engine compartments.
• Strong construction for extended service life.
• 5/16" to 1-1/8" pipe capacity. |
 |
CalVan Tools Fractional Double Flaring Tool Kit CAL163
This 45 degree double flaring tool set is designed to withstand the high pressures necessary to double flare soft steel tubing, as well as, single flare soft copper, aluminum and brass tubing. Tool is safely stored in a heavy-duty polypropylene box.
• Set includes drop forged compressor yoke, five (5) double flare adapters and threaded die holding bar with size capacity 3/16", 1/4", 5/16", 3/8", 1/2". |
 |
CPS Products Pro-Set Premium Tube Cutter & Mini Tube Cutter CPSTCSET
Includes the TC274 Premium Tube Cutter and a free TC127 Mini Tube Cutter. Use on hard or soft copper, aluminum & brass tubing. Lifetime Warrantee.
TC274 - PREMIUM TUBE CUTTER
• Smooth operation provides consistent clean cuts.
• Premium Cutting Wheel - Top grade steel for easy cutting and longer life.
• Capacity: 1/8" to 1-1/8" 4mm to 28mm.
TC127 - MINI TUBE CUTTER
• Oversized Turning Wheel - Designed and approved by the service technician for a sure comfortable grip.
• Capacity: 1/8" to 5/8" 4mm to 15mm. |
 |
K-D Tools Mini Tubing Cutter KD 2107
Cut thin-wall steel, plastic, copper and brass tubing from 1/8" to 5/8" (3mm to 16mm) diameters. Two rollers provide burr-free cut. Small size allows cutter to fit into tight work areas. Strong metal frame and die cast carrier. |
 |
K-D Tools Tubing Bender KD 2189
Bend 3/16, 1/4, 5/16 and 3/8" copper and steel tubing. Tool makes tight bends without the tube collapsing. Roller adapters are included for each tubing size. Place tubing between the adapter and studs and squeeze the handles to bend. |
 |
K-D Tools Tubing Bender KD 2517
Bend 3/16, 1/4, 5/16 and 3/8" diameter tubing without kinking. Place tubing in groove and turn the handle to bend. Heavy-duty construction provides years of service. |
 |
K-D Tools Double Flaring Tool Kit KD 41860
• Forged alloy steel
• Through hardened
• Slots on yoke firmly engage with bar assembly for greater strength
• Precisely flares tubing up to 0.040 wall thickness to SAE 45" flares. Hardened bar assembly clamps 7 tubing sizes
• Set includes corresponding adapters for forming double flares and is packaged in a sturdy case with full instructions.
• Do not use on stainless steel tubing
• Set Contains: SAE Bar Assembly, Yoke Assembly, Reamer, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, and 5/8" Flaring Tool Adapter
|
 |
Lisle Double Flaring Tool Set LIS31310
• Makes Both Single and Double SAE Flares
• This tool set includes everything to flare thin wall steel, aluminum or .040 wall soft copper tubing.
• The set includes 5 thread dies and adapters for forming double flares on the following tubing sizes: 3/16", 1/4", 5/16", 3/8" and 1/2". However, this set is not for use on stainless steel tubing.
• The set is packaged in a durable, oil and grease resistant tray for storage.
• Full instructions are included.
|
 |
Lisle Tubing Bender LIS44000
Easy to use with one end connected - or can be mounted in vise. Exclusive nylon form prevents kinking or flattening. For 3/16", 1/4", 5/16" and 3/8" O.D. tubing. Not recommended for 3/8" steel. |
 |
Lisle Mini-Cutter for Metal Tubing LIS50000
Easy-to-use mini-cutter features all nylon construction with a tough hardened blade, giving you smoother, easier operation and longer tool life. Can be used in tight spaces right on the car. For all types of metal tubing. Handles the smallest tubing up to 5/8" O.D. Completely non corrosive. |
 |
Mastercool Hydraulic Tube Flaring System - 45°, Push-Connect, Double Flare MAS71300
• Production quality flaring is made easy with this hand operated hydraulic ram.
• The patent pending "Hydra-Flare" ram produces the power necessary to produce proper fitting ends on car or off.
• Made in the U.S.A.
• Fabricates push connect flares found on transmission cooler, fuel and some brake lines as well as fabricates 45° and double flare flares.
• Production quality flaring is made easy with the "Hydra-Flare" hand operated hydraulic ram
• 3 sizes for push connect (1/4", 5/16", 3/8"), 6 dies sets for 45° (3/16" o 1/2"), 5 double flaring adapters (3/16" to 1/2")
• Comes with molded carrying case |
 |
Mastercool Universal Hydraulic Flaring Tool Kit MAS71475
• Production quality flaring is made easy with this hand operated hydraulic ram.
• The patent pending "Hydra-Flare" ram produces the power necessary to produce proper fitting ends on car or off.
• Made in the U.S.A.
• This kit fabricates Push Connect Flare: 1/4", 5/16" and 3/8"; GM Fuel Line Flare: 5/16", and 3/8"; Flare/Double Flare 3/16", 1/4", 5/16", 3/8" and 1/2" and Metric Bubble Flaring 4.75mm, 5mm, 8mm, and 10mm.
• Comes in a molded box. |
 |
Mastercool 10mm Replacement Adapter MAS71475-10M
• Replacement 10mm adapter for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
Mastercool 10mm Die Set MAS71475-110M
• Replacement 10mm die set for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
Mastercool 4.75mm Die Set MAS71475-14M
• Replacement 4.75mm die set for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
Mastercool 6mm Die Set MAS71475-16M
• Replacement 6mm die set for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
Mastercool 8mm Die Set MAS71475-18M
• Replacement 8mm die set for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
Mastercool 4.75mm Adapter MAS71475-4M
• Replacement 4.75mm adapter for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
Mastercool 6mm Adapter MAS71475-6M
• Replacement 6mm adapter for Mastercool 71450 Double Flare and Metric Bubble Flaring Tool Set |
 |
Mastercool 8mm Adapter MAS71475-8M
• Replacement 8mm adapter for Mastercool 71450 Double Flare and Metric Bubble Flaring tool set. |
 |
OTC Stinger Fractional Double Flaring Tool Kit OTC4503
• Designed for double or single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 degrees).
• Includes five adapters 3/16" through 1/2".
• Chrome swivel, made of alloy steel reduces friction. Forged yoke made of heat-treated steel. Housed in a blow-molded storage case. |
 |
OTC Stinger Bubble (I.S.O.) Flaring Tool Kit OTC4504
• Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems.
• Includes four dies: 4.75, 6, 8, and 10mm adapters.
• Forged steel yoke, flaring bar, and all the adapters needed for ISO bubble flaring.
• The most economical "Bubble" flare tool to date. Housed in a blow-molded storage. |
 |
OTC Metric Double Flaring Tool Set with Cutter OTC6506
• Designed for metric, steel brake lines where double flaring is required.
• Also performs 45° single flares on 4mm, 4.75mm, 6mm, 8mm, 10mm, 12mm, and 14mm copper, aluminum, brass, and magnesium tubing.
• Includes the No. 6514 tubing cutter and adapters for double flaring 4mm, 4.75mm, 6mm, 8mm, and 10mm tubing. |
 |
SK Hand Tool Metric Bubble Flaring Tool Set SK 90428
• Forms international standard bubble flare in one fast operation. Flares metric hydraulic brake lines used on European, Japanese and American automobiles and light trucks like the new Ford F150. This unique design makes flares on 4 sizes of tubing: 4.75 mm (3/16"), 6 mm, 8 mm and 10mm O.D. Will flare soft double wall steel tubing with a wall thickness up to .028". Can also be used with soft copper and aluminum tubing.
• Set Contents: For soft steel or Bundy tubing 4.75 mm (3/16"), 6 mm, 8 mm or 10 mm O.D. tubing. Packaged in a blow molded case. |
 |
SK Hand Tool Fractional 45 Degree Double Flaring Set SK 90433
• Recommended for Bundy and other annealed soft steel tubing (wall thickness to .035"). Also makes single or double flares in soft copper or aluminum tubing. Small, lightweight, easy to handle. Forged steel yoke; swivel type hardened steel, chrome-finished flaring cone. Bar provides positive grip of tubing. Conforms to Federal Specification GGG-F- 451a, Type 1, Class 2, Style A.
• Set Contents: For 3/16", 1/4", 5/16", 3/8" and 1/2" O.D. tubing. Packaged in a blow molded case. |
 |
V8 Tools 3/16” Tubing Bender/Pliers V8 806
Unique head design allows for sharper bends without collapsing the tubing or leaving a deep mark on the surface. When closed, the two handles are more than 3-1/4” apart and allow enough leverage to bend steel tubing easily. You may hold firmly to align and adjust.
|
