Transmission Jacks

Click here to compare prices.

AP 500HWA Astro Pneumatic 1/2 Ton Telescoping Transmission Jack AP 500HWA

• Ideal for under-hoist applications
• Double piston construction
• Fully adjustable universal saddle with safety chain
• Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission
• Safety valve
• Large handle to maneuver jack

Specifications:
Weight capacity: 1,000 lbs.
Max. saddle height: 70-1/2" (1792 mm)
Min. saddle height: 34" (867 mm)
Hydraulic lift: 36" (925 mm)
Overall length: 26-1/2" (673 mm)
Saddle tilt (Foward/Backward): 30/15 degrees
Saddle tilt (Left & Right): 15 degrees
Net weight: 153 lbs. (69.85 kg)
OME41000 Omega Hi-Lift Transmission Jack - 1000 Lb. OME41000

• Two stage chrome-plated rams operated by user-friendly foot pedal.
• Extra-wide base lowers center of gravity and promotes stability
• A unique handy release pedal provides safety in lowering the load
• Rugged steel wheels and full-swivel ball-bearing casters
• Tilting head with expandable saddle and safety chains

Specifications:
Capacity: 1000 Lbs.
Min. height: 36-3/4"
Max. height: 76-5/8"
Base size: 36-1/8"x24-1/8"
Weight: 160 lbs.
OTC1522A OTC Transmission Jack Lo-Lift Stinger Hydraulic, 2,000 lbs. Capacity OTC1522A
• Rugged, stable unit is ideal for handling heavy transmissions.
• Includes adapter plate for Eaton Fuller Road Ranger transmissions
• Low profile design gets under the lowest clearance trucks, making it ideal for clutch repair work.
• Pump handle rotates 360° for operator convenience.
• Safety overload prevents use beyond its rated capacity.
• Height range 6-7/8" to 35-1/4".
OTC1585A OTC Power Train Lift With Tilting Plate OTC1585A

• Ideal for engine and transaxle service
• Supports up to 1,250 lbs.
• Compact design and swivel casters for easy maneuverability
• Comes with tilting plate.
• Height range is 29-1/2" to 68-1/2"
OTC1595 OTC Power Train Lift, 2,500 lb. Capacity OTC1595

This lift will handle engine and transmission assemblies, gas tanks, drive axle assemblies, engine / transaxle assemblies, electric bus batteries, and more.
• Scissors-type design allows access to all four sides of a component.
• Powered by a quiet, 110V electric / hydraulic pump.
• Smooth, steady lifting and lowering motion controlled by hand-held remote.
• Two patent pending independent adjusting screws tilt the table ±15° side-to-side, or fore-and-aft, and ensure maximum stability of the table in any position.
• Larger casters accommodate heavy loads.
• A 30 ft. long retractable extension cord reel is mounted to the frame.
OTC1728 OTC High Lift Transmission Jack with Air Assist First Stage OTC1728

This 1,000lb. capacity jack makes quick work of removing and installing today's automotive and light truck transmissions. Unique lifting platform includes an air assist feature that rapidly raises the mounting head to the transmission. The second lifting stage is hydraulically actuated, permitting precise operator control during the removal and final installation process.
Transmission mounting head features four ratcheting brackets that adjust to fit a wide range of transmissions. Four-wheel base with locking swivel casters provides stability and portability. Foot-operated release allows operator to guide and control the load during transmission removal. Meets or exceeds ANSI PALD standards. Lifetime Warranty and made in the U.S.A.

Specifications:
Max. Load Capacity: 1,000 lbs.
Overall Height (low position): 34 1/2"
Max. Height: 75"
Max Forward Tilt: 50 degrees
Max. Backward Tilt: 20 degrees
Max. Side Tilt (either side): 10 degrees
Leg width: 41"
OTC1791 OTC 1,000 lb. Capacity High Lift Transmission Jack OTC1791

Universal mounting head provides wide fore and aft tilt range, making alignment of transmission easier. Additional reach and spread are also provided. Foot pump and pedal release mechanism give precise ease of control when positioning or removing a transmission. Adjustable nylon tie-down strap safely secures load. Two-stage hydraulic cylinder design speeds lifting of transmission into position for installing. Very stable work platform has four swivel casters, enabling jack to be easily maneuvered under the vehicle. Made in the U.S.A., carries OTC's unique Lifetime Marathon Warranty.

Specifications:
Max. load lifting capacity first stage: 1,000 lbs. to 73 1/2"
Minimum height: 36"
Maximum height: 73 1/2"
Maximum forward tilt: 50 Degrees
Maximum backward tilt: 38 Degrees
Maximum side tilt (either side): 14 Degrees
Leg width: 40"
Weight: 118 lbs.
OTC1793A OTC Stinger Hi-Lift Transmission Jack - 1000 Lb. Capacity OTC1793A

• Fully adjustable universal saddle with adjustable
corner brackets and safety chain for optimum positioning of the load.
• Flash chromed rams that inhibit rust from entering
the hydraulic system.
• Safety overload system prevents the jack from being used beyond its rated capacity.
• Wide leg base with 4" polyurethane swivel wheels
that provide stability and easy maneuvering. (Brakes on two of the wheels.)
• Foot operated pump and lowering pedal for ease of control when positioning or removing a transmission.
• Height in low position, 34-7/16"; max. 70-7/8". Tilt forward, 24°; backward, 19°; either side, ±20°.
• 2-year Limited Warranty.
OTC1794A OTC Stinger Air Assist Hi-Lift Transmission Jack - 1000 lb.s Capacity OTC1794A

• Air assist primary stage, activated by a foot pedal, for rapidly raising the mounting head to the load.
• Second stage, activated by a hand pump, provides
precise control when raising the load. Release knob
gives precise control when lowering the load.
• Big, easy-to-grip knobs make mounting head
adjustments simple; a safety chain secures the load.
• Wide leg base with 4" polyurethane swivel wheels
that provide stability and easy maneuvering.
(Brakes on two of the wheels.)
• Safety overload system prevents jack from being
used beyond its rated capacity.
• Height in low position, 36"; max. 74-7/8". Tilt forward, 42°; backward, 46°; either side, ±12°.
• 2-year Limited Warranty.
OTC5019A OTC Low-Lift Transmission Jack - 2,200 lb. Capacity OTC5019A

• The 8-1/4" low height is perfect for aerodynamic trucks with low ground clearance.
• Special mounting adapter (No. 220492) fits popular Eaton Fuller RoadRanger transmissions used on nearly all Class 7 and 8 heavy-duty trucks. Mounting plate angle is adjusted with the turn of a wrench.
• Degree of tilt: 20° back, 15° forward, 12° side to side.
• Swiveling pump handle permits ease of operation in restricted working spaces. Fast-acting pump quickly raises lifting arm.
• Weight: 330 lbs.
SUN5041B Sunex International 4-Ton Long Ram for SUN7700B SUN5041B

• Replacement ram only
SUN7700B Sunex International 700-Lb. Capacity Heavy Duty Hi-Lift Transmission Jack SUN7700B

• Channel iron extra heavy duty wide base for added stability
• Heavy duty ram with gradual release feature
• Large swivel casters for stability
• Adjustable saddle for ease of alignment
• Easily disassembled for transporting and storage
• Shipped in 2 cartons to allow delivery by UPS
• Replacement long ram available - Sunex 5041
• Lift range: 50-3/8" to 70-3/4"
• Saddle tilt: Fwd./Back 15°, Side 12°
SUN7704 Sunex International Fuel Tank Adapter for Transmission Jacks SUN7704

• Gas Tank Handler Adapter holds automotive, SUV, and truck fuel tanks up to a 40 gallon capacity.
• Four support blocks can quickly adjust to fit most fuel tanks up to a 40 gallon capacity.
• Foam pads are provided to protect the fuel tank.
• 2 nylon 'cinch' straps are provided to secure the gas tank during transport.
• Unique saddle adapter will fit most low profile and telescopic transmission jacks.
SUN7750 Sunex International Lo-Boy Transmission Jack - 1,200 Lb. SUN7750

• Low lift height of only 5-3/4", which accommodates most applications
• Versatile saddle design allows for total adjustment in every direction: 65 degrees forward, 18 degrees backward, 12 degress side to side tilt
• 360 degree rotation of pumping handle for ease of use

Specifications:
Capacity: 1,200 lbs.
Low height: 5-3/4"
High height: 31-1/2"
Base dimensions: 36"x18-3/4"
Shipping weight: 110 lbs.
SUN7752 Sunex International Truck Lo-Boy Transmission Jack - 3,000 Lb. SUN7752

• Ideal for most van and heavy-duty truck transmissions.
• Allows 12 degree tilt from side to side and 29 degrees forward tilt
• Pump handle rotates 360 degrees for all position operation
• Side trays hold tools and parts
• Large swivel casters for easy positioning and maneuverability

Specifications:
Capacity: 3,000 lbs.
Low height: 10"
High height: 36"
Base dimensions: 44"x29"
Shipping weight: 286 lbs.