Tire Service Machines and Accessories

Click here to compare prices.

Page 1 of 2 Next >>

COA1000 Coats 8 Mode Wheel Balancer COA1000
• A Solid High Volume Solution
• The Model 1000 Balancer has the mechanical and electronic power to be a key tool in high volume shops.
• 1-1/2 horsepower direct-drive motor and 16-bit microprocessor provide super-fast five second cycle times.
• Eight separate balancing modes (static and dynamic modes, RV and four different alloy modes, plus match mount).
• Operator “A" and “B" feature so two technicians can use at once.
• Convenient keypad entry
• Keyboard activated “hood start"
• Ounce/gram selectable readings with roundoff
• Self calibration
• Ergonomic weight and adapter storage
• Balancing Modes: 8
• Tire Diameter: Up to 40"
• Rim Width: 2" to 19.9"
• Max. Tire Weight: 150 lbs.
• Shaft Diameter: 28mm
•Shaft Length: 6-5/8"
• Resolution (Oz.): 0.01
• Resolution (Degrees) 1.4
• Accuracy (Oz.): .01
• Power Requirement: 220v AC 1-3 Phase
• Footprint: 57"w x 50"d
• Shipping Weight: 586 lbs.
COA113428 Coats XR Balancer Basic Passenger Car Coverage Kit (40mm) COA113428
COA113593 Coats XR Balancer Extended Passenger Car Coverage Kit (40mm) COA113593
COA113594 Coats XR Balancer Premium Passenger Car and Light Truck Coverage Kit (40mm) COA113594
COA114337 Coats 1250 Extended Adapter Kit - 28mm COA114337
• Extended Kit - Coverage for most OE passenger cars and most light trucks.
COA114338 Coats 1250 Premium Adapter Kit - 28mm COA114338
• Premium Kit - Coverage for most OE and aftermarket car and light trucks wheels.
COA4050A Coats Single-Stage Center-Post Tire Changer - Air Powered COA4050A
The model 4050A sets the industry standard for high-volume center post tire changer design.
Modeled after the popular 40-40SA Center Post Tire Changer, the Model 4050A represents the most tried-and-true technology in the business.
Featuring single stage operation, a major advantage over competitive two-stage center post machines' the 4050A is super fast and super powerful.

• All operations - bead loosening, demounting, mounting and inflation - are performed in the same position.
• The 4050A comes equiped with a generous 7.5 gallon surge tank, 50% larger than other competitive models.
• The 4050A features a contoured tabletop for proper rim support and state-of-the-art components for quality performance with less effort.

Specifications:
Rim diameter capacity: 10" - 17.5"
Rim width capacity: 19" maximum
Tire diameter (maximum outside): 38"
Type of drive system: Air
Required air source: 110 to 175 psi, 2 hp compressor, 5 SCFM @ 150 PSI
COA5000 Coats Truck Tire Changer for Tube or Tubeless Tires COA5000
• Easy-to-use swing-arm houses all hydraulic controls, with a dedicated lever for each powered function.
• Self-centering hydraulic clamping chuck .
• Adjustable pressure regulator ensures proper matching of chuck pressure to rim strength.
• Heavy, tapered roller bearings, and a dual direction hydraulic motor provide smooth torque.
• Roller-type tire spreader standard.
• Accommodates tube or tubeless tires with rim diameters from 15" to 38".
COA5035E Coats 5035 Rim Clamp Economy Tire Changer - Electric Drive COA5035E
The Model 5035E offers an affordable way to expand your wheel service capabilities and
you customer base!
• For Alloy & Steel Wheels
• Electric Drive System for the Turntable Reduces Noise
• Air Powered Side Bead loosener for power
• Exclusive X-shaped tabletop
• Includes Bead Seating Jets to Aid in Inflation
• 3.4 Gallon Air Surge Tank built into the Tower to Reduce Floor Space Required
• Includes set up and training by Factory Authorized Partner
• Made in the USA
• 6 Month Parts Warranty
• Rim Diameter: 12"-19" External, 15"-22" Internal
• Rim Width: 10" Max
• Tire Diameter: 40" Max
• Drive System Electric: 110v
• Air Source: 110 to 175 PSI
• Chassis Footprint: 32"w x 40"d x 70"h
• Shipping Weight: 450 lbs.
Includes:
• Lube Applicator
• Lube Bottle
• Bead Lift Tool
• Hose with Air Chuck
• Inflation Safety Limiter
• Filter Lubricator
COA5040A Coats Model 5040A Rim Clamp Tire Changer - Air Drive COA5040A
• Wheel Capability: Steel, many alloys, and some performance applications.
• Tool Head Offset Adjustment: Spring assisted lift, manual set back, and lock.
• Shape of Tabletop: “X" shaped for rigid perimeter support of the wheel.
• Wheel Clamping Method: Four self-centering clamps in tabletop actuated by pneumatic cylinder.
• Bead Loosening System: Foot control actuates cylinder that handles wheels up to 10.5" wide.
• Drive System (Electric 5040E): 110v, 15A, single phase; 110 to 175 PSI, 2 HP compressor, 5 SCFM at 150 PSI.
• Required Air Source (Air Drive 5040A): 110 to 175 PSI, 5 HP compressor, 14 to 15 SCFM at 150 PSI.
• Pressure Limiter: Standard
• Bead Seating Reservoir: 3.4 gal. tank, pressure protected.
• Inflation Gauge: Easily calibrated 0 to 60 PSI gauge with protection to 200 PSI. Damage resistant Lexan faceplate.
• Filter Lubricator Standard with automatic drain and large capacity lubricator bowl.
• Clamping Range: 10" - 21" External, 12" - 24" Internal.
• Maximum Tire Width: 10.5 inches.
• Maximum Tire Diameter: 50 inches.
• Chassis Footprint: 35" wide x 44" deep x 70" high.
• Shipping Weight: 585 lbs.
COA5040E Coats Model 5040 Rim Clamp Tire Changer - Electric Drive 110V COA5040E
• Wheel Capability: Steel, many alloys, and some performance applications.
• Tool Head Offset Adjustment: Spring assisted lift, manual set back, and lock.
• Shape of Tabletop: “X" shaped for rigid perimeter support of the wheel.
• Wheel Clamping Method: Four self-centering clamps in tabletop actuated by pneumatic cylinder.
• Bead Loosening System: Foot control actuates cylinder that handles wheels up to 10.5" wide.
• Drive System (Electric 5040E): 110v, 15A, single phase; 110 to 175 PSI, 2 HP compressor, 5 SCFM at 150 PSI.
• Required Air Source (Air Drive 5040A): 110 to 175 PSI, 5 HP compressor, 14 to 15 SCFM at 150 PSI.
• Pressure Limiter: Standard
• Bead Seating Reservoir: 3.4 gal. tank, pressure protected.
• Inflation Gauge: Easily calibrated 0 to 60 PSI gauge with protection to 200 PSI. Damage resistant Lexan faceplate.
• Filter Lubricator Standard with automatic drain and large capacity lubricator bowl.
• Clamping Range: 10" - 21" External, 12" - 24" Internal.
• Maximum Tire Width: 10.5 inches.
• Maximum Tire Diameter: 50 inches.
• Chassis Footprint: 35" wide x 44" deep x 70" high.
• Shipping Weight: 585 lbs.
COA5045E Coats 5045 Rim Clamp Tire Changer with Cabinet- Electric Drive COA5045E
The Coats 5045E Rim Clamp® is a highly capable, cost effective tire changer for today's busy shops.
• For Alloy & Steel Wheels
• Electric Drive System for the Turntable Reduces Noise
• Air Powered Side Bead loosener for power
• Exclusive X-shaped tabletop for visibility and safety
• Includes Bead Seating Jets to Aid in Inflation
• 3.4 Gallon Air Surge Tank built into the Tower to Reduce Floor Space Required
• Includes set up and training by Factory Authorized Partner
• Made in the USA
• Full Rim Clamp® warranty
• Rim Diameter: 10"-21" External, 12"-24" Internal
• Rim Width: 10.5" Max
• Tire Diameter: 40" Max
• Drive System Electric: 110v
• Air Source: 110 to 175 PSI
• Chassis Footprint: 35"w x 44"d x 70"h
• Shipping Weight: 585 lbs.
Includes Standard
• Side Storage Cabinet
• Lube Applicator
• Lube Bottle
• Bead Lift Tool
• Hose with Air Chuck
• Inflation Safety Limiter
• Filter Lubricator
COA5050AX Coats 5000 Series Rim Clamp Tire Changer - Air Drive COA5050AX
• Coats 5000 Series Tire Changers combine a powerful 1.5 HP air drive system (or 1 HP electric drive system) and an extended Rim Clamp™ tabletop to handle
a greater range of tires and wheels.
• Manual swing-arm makes mounting and demounting simpler.
• Capable of clamping rims on the interior or the exterior.

Specifications:
• Rim diameter capacity: 10" - 21" clamped externally; 12" - 24" clamped internally
• Rim width capacity: 14" maximum
• Tire diameter capacity: 50" maximum outside diameter
• Air source requirements: 110 - 175 PSI; 15 SCFM @ 150 PSI
COA5050EX Coats 5000 Series Rim Clamp Tire Changer - Electric Drive COA5050EX
• Coats 5000 Series Tire Changers combine a powerful 1.5 HP air drive system (or 1 HP electric drive system) and an extended Rim Clamp™ tabletop to handle
a greater range of tires and wheels.
• Manual swing-arm makes mounting and demounting simpler.
• Capable of clamping rims on the interior or the exterior.

Specifications:
• Rim diameter capacity: 10" - 21" clamped externally; 12" - 24" clamped internally
• Rim width capacity: 14" maximum
• Tire diameter capacity: 50" maximum outside diameter
• Air source requirements: 110 - 175 PSI; 15 SCFM @ 150 PSI
COA6000 Coats Truck Tire Changer for Tubeless Tires COA6000
• Designed for servicing tubeless tires. It can change tubeless truck tires in a matter of minutes without the use of adapters, as well as loosen tube-type tire beads.
• Handles wheel widths 6" to 15" and diameters of 16.5" to 24.5".
• Changes all 15-degree single-piece highway rims, including demountable Dayton wheels, reverse disc Budd wheels, and standard disc wheels.
• One control stick for pivoting the tabletop and clamping the rim chuck.
• Bead loosening, mounting and demounting are activated by dedicated two-way pedals.
COA6401 Coats Heavy-Duty Computerized Tire Balancer COA6401
With exclusive direct-drive power, the Model 6401 has only one moving part, resulting in extremely accurate balancing.
• Handles tires up to 46" in diameter and rims up to 26" in diameter and from 4.5" to 18" wide.
• Keypad data entry, and bright LED displays indicate weight locations and amounts.
• Single-spin dynamic, static and RV balancing modes.
• Average cycle time for truck tires is a fast 12 seconds.
• Automatic hub nut loosening feature, a back/front cone mounting system, a removable stub shaft.
• Self calibration.

Specifications:
Tire Diameter: Up to 46"
Rim Width: 4 1/2" to 18"
Rim Diameter: 16" to 26"
Maximum Tire Weight: 350 lbs.
Resolution: +0.01 oz., +1.4 degrees
Accuracy: +.5 oz in truck mode, +.1 oz in car mode
Motor Rated for 850 RPM
Power Requirements: 220 VAC, 50/60 Hz 1 Phase,fused @ 30 amps (3 Ph. also available)
COA7050AX Coats Rim Clamp® Tire Changer - RunFlat Capable - Air Powered COA7050AX
• The Model 7050 Tire Changer was designed especially to handle tough-to-change tires like Low Profiles, Runflats, and other Tough Tires Fast and Easy
• Handles wheels up to 24" (external) and 26" (internal) clamping.
• The robotic arm lets you easily and safely flex stiff sidewalls without superhuman effort. The arm also assists in wheel clamping, second bead removal, and top bead mounting.
• The 7050 is easy for any operator to learn, and it won't slow you down on standard tires and wheels. It's the tire changer that takes you seamlessly into the next century.
Features:
• Robotic Arm provides the power needed to change runflats and other tough tires.
• Manual bead roller forces bead down for easy lubrication .
• Rim Clamp® design for unsurpassed reliability.
• X-Shaped for Perimeter Support of the Wheel without damage.
• Nylon duckhead protects expensive alloy wheels.
• Extended tabletop to handle larger rims.

Specifications:
Rim Diameter: 6"-22" Externally; 8"-26" Internally

Rim Width: 10.5" Maximum
Tire Diameter: 50" Max Outside

COA7050EX Coats Rim Clamp® Tire Changer - RunFlat Capable - Electric Powered COA7050EX
• The Model 7050 Tire Changer was designed especially to handle tough-to-change tires like Low Profiles, Runflats, and other Tough Tires Fast and Easy
• Handles wheels up to 24" (external) and 26" (internal) clamping.
• The robotic arm lets you easily and safely flex stiff sidewalls without superhuman effort. The arm also assists in wheel clamping, second bead removal, and top bead mounting.
• The 7050 is easy for any operator to learn, and it won't slow you down on standard tires and wheels. It's the tire changer that takes you seamlessly into the next century.
Features:
• Robotic Arm provides the power needed to change runflats and other tough tires.
• Manual bead roller forces bead down for easy lubrication .
• Rim Clamp® design for unsurpassed reliability.
• X-Shaped for Perimeter Support of the Wheel without damage.
• Nylon duckhead protects expensive alloy wheels.
• Extended tabletop to handle larger rims.

Specifications:
Rim Diameter: 6"-22" Externally; 8"-26" Internally

Rim Width: 10.5" Maximum
Tire Diameter: 50" Max Outside

COA775 Coats Computerized Wheel Balancer COA775
This unit is designed for low volume occasional balancing of OE fitments but offers features you will find on much more elaborate machines.

• Integrated LED Matrix Display! Easy-to-read visual cues and keypad promote proper balancing techniques and faster bay turnaround times
• 10 Balancing Modes. Multiple static, dynamic, and alloy modes.
• Self Calibrating - Provides balancing accuracy within 1/100 of an ounce
• Space Saving Design
• Tape-A-Weight and Hidden Weight Capability
• 40 mm Shaft

Specifications:

Balancing Modes: 10
Maximum Tire Diameter: 34" to 40"
Rim Width: 2" to 20"
Rim Diameter: Up to 30"
Maximum Tire Weight: 100lbs. to 130lbs.
Shaft Diameter: 40mm
Balancing Speed: 100 RPM
Motor: 110v, 1Ph
Shipping Weight: 198lbs.

Page 1 of 2 Next >>