 |
Kastar Hand Tools Master Power Steering Pump and Alternator Remover/Installer Kit KAS5238
• Removes and installs press-on-type belt drive accessory pulleys.
• Interchangeable components to work on GM Quad 4, GM 3.1L, and Ford 4.6L
• Works with hand tools or an impact gun.
• Kit includes a special holding bar to stop housing
from spinning during use with impact gun. |
 |
K-D Tools Crankshaft Pulley & Steering Wheel Puller KD 2291
Puller removes crankshaft pulleys on Chrysler 2.2 and 2.5-L engines and pulls steering wheels on most US and import cars. The floating swivel on the center screw prevents damage to the steering column. Five sets of side bolts include 3/8-16 UNC, 5/16-24 UNF and 8mm x 1.25. |
 |
K-D Tools Steering Wheel Lock-Plate Remover and Installer KD 2414
Depresses lock plate to allow easy removal and re-assembly of snap ring. Tool is a must for servicing turn signals, ignition switches and steering locks built into the steering column. Includes SAE and metric center screw adapters. Set screw locks telescopic column in place while depressing lock plate. |
 |
K-D Tools GM Steering Wheel Puller Legs KD 3510
Use in conjunction with the SER 2291 Steering Wheel Puller to remove steering wheels on late model GM vehicles that are not pre-drilled to receive standard bolts.
Applications Include:
Cadillac: 1997 and new Catera
Chevrolet/GMC: 1997 and newer Malibu, Corvette,1998 and newer C- and K- series trucks, full-sized vans, Astro/Safari vans
Buick: 1997 and newer Park Avenue and Regal
Oldsmobile: 1997 and newer Cutlass
Pontiac:1988-1993 LeMans, 1997 and newer Grand Prix and Trans Sport Van
Includes bushing to cover the following applications:
Ford: 1997-Current Explorer, Ranger, Pickups
Chrysler: 1999 Jeep Grand Cherokee |
 |
K-D Tools Power Steering Pump Pulley Kit KD 41560
• Ideal for expanding tail pipes and exhaust system removal and installation
• Kit contents: Exhaust and Tailpipe Cutter (Complete Tool), Cutter Chain Assembly, Exhaust and Tailpipe Expander, and Tailpipe Chisel
• Removes and installs power steering pump pulleys off most domestic vehicles.
• Includes the necessary adapters for servicing GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines.
• Includes quick disconnect tool for GM 1/2, 3/4, and 1 ton pickups, 3893 Disconnect Tool; 41561 Bushing and Screw Set and the 41562 Bushing and Screw Set.
• Fits pulley hubs with diameters of 1-1/8 in., 1-1/4 in., 1-5/16 in. and 1-3/8 in.
|
 |
K-D Tools Master Bolt Grip Kit - Multi-Use Puller Kit KD 41600
• Master Bolt Grip Kit works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pickups, SUVs, and small engines.
Kit Contents:
• Two or three way yoke
• 4 pc. tip set
• Metric bolt set
• SAE bolt set
• Center screw for puller (2) |
 |
K-D Tools Steering Wheel Puller Kit KD 41620
• This kit has what it takes to remove a steering wheel from most domestic and import cars with or without telescoping tilt columns. Use the puller legs with the steering wheel puller to remove steering wheels on late model GM vehicles
Contents:
• Steering Wheel Puller Yoke and Screw Extension Bushing
• Pivot Pin
• Lock Plate Removal Tool
• 2 Pc. Puller Leg Package
• Lock Plate Remover Collars and Nut Washer
• Lock Place Depressor Frame
• Screw Package |
 |
Lisle Steering Wheel Pivot Pin Remover LIS19940
Removes the pivot pin on GM, Ford and Chrysler tilt and telescoping Saginaw columns. Includes and extra screw. |
 |
Lisle Steering Wheel Lock Plate Tool LIS57340
Fits Domestic Lock Plates, Including Tilt and Telescoping. Tool depresses lock plate for easy removal of lock ring. Allows access to steering column for repair work. Comes with standard and metric adapters, plus two puller frames. Fits most domestic lock plates, including tilt and telescoping columns. Works on vehicles with air bags.
|
 |
OTC Power Steering Pump/Alternator Remover/Installer Tool OTC4681
• Reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys.
• Also removes and installs other press-fit pulleys with a hub diameter of 1-1/8" (28mm), 1-1/4" (32mm), 1-5/16" (34mm), or 1-3/8" (35mm). |
 |
OTC Power Steering Pump Pulley Replacer OTC7005
An ideal companion to the 7185 the 7005 is a real timesaver when it comes to installing power steering pump pulleys and GM press-on water pump pulleys. Wont damage internal components by exerting force through the pump shaft. A roller bearing in the tool allows for easy turning and the tool shape prevents damage to the pump. Threads are 3/8in - 16 to fit the pulley shaft threads. •Same as Ford No. T65P-3A733-C. |
 |
OTC Power Steering Pump/Alternator Pulley Remover OTC7185
The 7185 tool removes pulleys on most Chrysler Ford GM and VW vehicles including Saginaw Thompson and the Ford C2 power steering pumps; GM belt-driven vacuum pumps on both gas and diesel cars; and press-on water pump pulleys on GM 4-cylinder and V6 engines. The 7185 works on pulleys with hub diameters of 1 1/8in. 1 1/4in. 1 5/16in. and 1 3/8in. With split collet design the jaws grip the pulley flange for damage-free removal. Mechanical screw power does the actual pulling. |
 |
OTC Ford Power Steering Pump Pulley Installer OTC7771
The 4.6L modular engine that Ford and Mercury use on their 1991 and newer models presents special problems of its own when it comes to installing the power steering pump
pulley. Installer No. 7771 is a required tool to ensure that the pulley or pump shaft aren't damaged during installation. Threads are 8mm to fit the metric threads on the Ford C111 pump. |
 |
OTC Steering Pivot Pin Remover OTC7889
Tilt and telescoping steering columns are much easier to service when your tool box has one of these pivot pin removers in it. Works on 1969-current GM, Chrysler and Ford vehicles with Saginaw steering columns. |
 |
OTC Steering Wheel Remover/Lock Plate Compressor Set OTC7927A
Removing steering wheels of most domestic and imported vehicles, with or without telescoping tilt steering columns, is easy with this new set. You get the No. 7245 steering wheel puller, including four sets of cap screws needed for various thread requirements. The No. 7815 steering wheel lock plate compressor is also included, to compress the steering wheel lock plate to remove or install the snap ring. It accesses the turn signal switch and S.I.R. modules on current GM vehicles. Also works on older GM, AMC, and Chrysler vehicles with tilt or conventional steering columns. The No. 7889 steering pivot pin remover for Saginaw steering columns completes the set. Contained in convenient plastic storage tray. |
 |
OTC Steering Wheel Puller Leg Kit OTC7929A
• Used with OTC 7245 or 7403 steering wheel pullers
• Applications: Pontiac (1988-93 Lemans, 1997-current Grand Prix, Transport van); Cadillac (1997-current Catera); Buick (1997-current Prak Avenue, Regal); Chevrolet/GMC (1997-current Malibu, Corvette, 1998-current C- and K- series trucks, full size vans, Astro/Safari vans); Ford (1997-current Explorers, F150 and Ranger pickups); Chrysler (1999 Jeep Cherokee). |
