Menu
Oxy-Acetylene Welding Equipment
 |
Bernzomatic Cutting & Welding Oxygen & Acetylene Torch Kit BNZOA4000KB • Applications and uses: Cutting steel up to 6" thick, welding steel up to 3/8" thick, soldering, heat treating, priming, flame cleaning, and hard facing. • Heavy duty components - brass and copper construction • Complete Kit! - Just Add Gas Bottles • Comes with: - Oxygen regulator - Acetylene regulator - 3 welding tips (#0, 2, 4) - Torch handle - cutting attachment - 2 flashback arrestors - cutting nozzle (#0) - sparker, 15 ft. twin hose - welding goggles - molded carrying case (Fuel tanks NOT included) |
 |
Firepower Multi-Flame (Rosebud) Heating Tip - Size 6 FIR03240146 • Multi-flame heating tip for pre-heating, straightening, annealing, bending, forging, etc. • Uses heat resistant replaceable copper tip ends • Use with Acetylene or Hydrogen gases • Spiral mixer provides optimum flame characteristics |
 |
Firepower Acetylene Torch Cutting Tip for Up to 1/2" FIR03310180 • One piece tellurium copper construction • Cold swedged during manufacturing for optimum strength • Flame tested to ensure rated cutting performance Size-0 for cutting up to 3/8" to 1/2" |
 |
Firepower 150 Series Oxy-Acetylene Outfit - 4" Cap FIR03840656 These "user friendly"outfits offer a complete system for smaller welding and cutting jobs. The 150 series is best suited for autobody repair, motor enthusiasts, "DIY users" and first time welders. • 150 Series outfit includes a #0 welding nozzle and #0 cutting tip that welds up to 5/64" and cuts to 1/2". Optional tips allow you to weld to 1" and cut to 4". • Includes built-in Flashback Arrestors. • Torch handle includes built-in reverse flow check valves for added safety and protection against "reverse flow of gases." • Solid brass and stainless steel construction provide extended trouble-free service. • Tri-Lingual packaging appeals to broad customer base. • 2 year limited warranty. • U.L. listed. |
 |
Firepower Portable Oxy-Acetylene Tote Outfit - 150 Series FIR03840990 Everything you need except the "gas." These lightweight outfits allow you to take the torch to the job whether it is in the field or just around the yard. Ideal applications include plumbing, ranching, farming and HVAC.Takes the 5,620° flame to the job. • Totes are complete with: • WH260C Series Torch handle with built-in reverse flow check valves Flashback Arrestors. • 150 Series Cutting attachment. • #2 Welding nozzle welds to 1/8". • #0 Cutting tip cuts to 1/2". • 150 Series Oxygen/Acetylene regulators (Rear Entry Connections.) • 3/16" x 12.5' dualine hose, goggles/shade #5 and striker. • Tip-nozzle flow chart. • Tri-lingual instructions. • Cylinder wrench with chain. • Rugged molded plastic carry case. • 10 cu. ft. "MC" acetylene cylinder and 20 cu. ft. "R" oxygen cylinder (shipped empty). • U.L. listed. • Weight 36 lbs., 2 year limited warranty. |
 |
Firepower Oxygen Gas Regulator, 4-80 PSIG - Series250 FIR07819111 • For Oxygen - 540 CGA • 4-80 PSIG delivery pressure range • Solid brass and stainless steel construction • 2" easy-to-read gauges (PSI & kPa scales) • Fabric reinforced neoprene diaphragm |
 |
Firepower Acetylene Gas Regulator, 2-15 PSIG - Series250 FIR07819112 • For Acetylene - 510 CGA • 2-15 PSIG delivery pressure range • Solid brass and stainless steel construction • 2" easy-to-read gauges (PSI & kPa scales) • Fabric reinforced neoprene diaphragm |
 |
Firepower OXYGEN REG FIR07819116 |
 |
Goodyear Twin Welding Hose - 1/4" x 50' GY 03-1125 • Previously Goodyear model # WH1450 |
 |
Lincoln Electric Port-A-Torch LE KH657 The Port-A-Torch contains all the quality equipment needed for cutting, welding and brazing in a rugged moulded plastic carrying case. The outfit is designed to carry one MC acetylene cylinder and one 20 Cu. Ft. oxygen cylinder. As supplied, the outfit is capable of cutting to 1 in. (25.4mm) and weld to 1/16 In. Can cut to 4 In. (102mm) and weld to 1/2 In. (12.7mm) with larger tips and acetylene cylinder. Includes goggles, stricker and hose. The Port-A-Torch comes with a 1 year warranty on the regulators and the cutting and welding handle. • Brass torch handle with reverse flow check valves. • Cuts upto 4 In. • Welds upto 1/2 In. • 1 year warranty |
 |
Victor Cutskill® Medium Duty Oxcy-Aceteylene Outfit VIC03842500 Contents: • 250 Series regulators • WH270FC-V torch handle with built-in flashback arrestors and check valves • CA 270-V cutting attachment • O-UM welding nozzle • Series 3 cutting tip • Toolbox • RM grade hose, lighter, and soft-sided goggles • Cuts up to 1/2"/12mm (5"/127mm with optimal tips) • Welds up to 5/64"/1.9mm (1 1/4"/31mm with optimal nozzles) |
 |
Victor Cutskill® Heavy Duty Oxcy-Aceteylene Outfit VIC03842600 Contents: • 350 Series regulators • WH370FC-V torch handle with built-in flashback arrestors and check valves • CA 370-V cutting attachment • 2-UM welding nozzle • Series 1 cutting tip • Toolbox • RM grade hose, lighter, and soft-sided goggles • Cuts up to 3/4"/19mm (6"/153mm with optimal tips) • Welds up to 1/8"/3.2mm (3"/76mm with optimal nozzles) |