 |
Assenmacher Specialty Tools Oil Filter Tool Set AST2100
This 7 piece set contains oil filter wrenches for many domestic and foreign applications.
• The 27, 32 and 36mm sizes cover VW, BMW, newer Mercedes-Benzs, Saturn, newer Ford Turbo-Diesel trucks and the GM 2.2 liter Ecotec engine.
• The four cup-style wrenches cover many VW, BMW and Toyota models as well as the balance of Mercedes-Benz applications.
• Volvo models 99-04 are also covered. |
 |
Assenmacher Specialty Tools Oil Filter Wrench ASTM0219
• (74mm, 14flats) Oil filter wrench.
• Applicable: Chrysler: Crossfire 3.2L V6 2004, Ford Escape Hybrid 2006, Mazda 3 2.3L 2004-2006, Mercedes G-wagon G500 2002, Toyota Avalon and Camry 1984-2004, Celica 1983-1985 and Turbo 1988-1989, Corolla (diesel) 1984, Cressida 1981-1992, Previa 1991-1997, Sienna 1998-2004, Solara 1999-2001, Supra 1979-1998, T100 1993-1998, Tacoma 1995-2004, Truck/4Runner 1977-2002, Tundra 2000-2004, Van 4WD/ATM 1987-1989, Ford Fusion and Mercury Milan |
 |
Assenmacher Specialty Tools 3 Piece, Toyota Oil Filter Set ASTTOY300
• Set includes TOY640, TOY730, and M0219. With TOY300 you have every gas engine Toyota model covered between 1983 and 2006. Other applications of our TOY640 include the new style oil filter housing cap on 2005 Toyota Avalon and the 2006 Lexus GS300 |
 |
Assenmacher Specialty Tools Toyota Oil Filter Wrench ASTTOY640
• Oil Filter Wrench.
• Applicable: Lexus GS 300 2006, Scion xA, xB, tC 2004-up, Toyota Avalon 2005, Camry (4 cylinder) 1983-2004, Corolla 1983-2004, Echo 2000-2004, Highlander (4 cylinder) 2001-2004, Matrix 2003-2004, MR2/spyder 1985-2004, Paseo 1992-1997, Prius 2001-2004, RAV4 1996-2004, Solara (4 cylinder) 1999-2004, and Tercel 1980-1998 |
 |
Assenmacher Specialty Tools Oil Filter Wrench ASTV410
• 86mm Oil filter wrench.
• Applicable: 2006 BMW 3 Series (E90), and all Volvo cars (except 2005 40 and 50 Series) 1999-2005 |
 |
CalVan Tools Truck and Tractor Oil Filter Pliers CAL291
• Handles all truck and tractor with range 4.25" to 7".
• Heavy-duty forged levers.
• Cushioned grips.
• Unique spring-action size actuator.
• Size creates leverage for higher torque diesel applications. |
 |
CalVan Tools Adjustable Oil Filter Plier CAL302
• This self-adjusting, spring action (NOT a Slop Joint) oil filter plier allow for a full range of filter applications. Heavy-Duty forged construction with textured grip add both strength and leverage to the tool.
• Fits filters from 2-1/4" to 6" (60-152mm)
• Patented design. |
 |
CalVan Tools Strap Style OIl Filter Wrench - Up to 9" Capacity CAL803
• This deluxe wrench adjusts quickly to any spin-on filter.
• Features 3/8" and 1/2" forged driver and heavy duty strap for high torque requirements.
• Fits filters up to 9" (228mm)
• A favorite among diesel engine mechanics. Removes filters in tight spots and sizes that no other style of wrench can! |
 |
CalVan Tools Three Legged Oil Filter Wrench CAL988
• Features gear driven legs to grip and turn the tightest filters.
• Designed for use with 3/8-in. drive or ¾-in. hex wrench.
• Compact design allows for use in tight spaces.
• Removes filters from 2 3/8-in. to 3 ¾-in. (60-95mm)
|
 |
Channellock Oil Filter Pliers - Adjustable CHA212
• 2-1/4" to 4-1/4" capacity
• HIgh carbon drop forged steel
• Right angle teeth grip in all directions
• PermaLock® fastener/pivot eliminates nut and bolt |
 |
Channellock 15" Oil Filter Pliers CHA215
• Right angle teeth grip in all directions.
• High carbon drop-forged steel
• Patented PermaLock® fastener eliminates nut and bolt failures.
• CHANNELLOCK BLUE® comfort grips.
• 6 size adjustments.
• 5.5" opening capacity. |
 |
Innovative Products of America SAE Multi Wrench - 3/8" - 13/16"
INN7895SAE
One Wrench: Eight Sockets
• Swivel handle for just the right angle
• Indexing head design
• Laser-etched handle and heads to mark hex sizes
• Durable chrome finish
• 11-lb. Magnet for easy placement when not in use
• Sizes: 3/8" - 13/16"
|
 |
Innovative Products of America GATOR JAWS™ Oil Filter Removal Pliers INN7899
• Reaches most hard-to-get-to filters. No more burns!
• If you have ever come across an oil filter that
was over-tightened, you know how difficult the
job can be to break it loose. GATER JAWS™ with its
powerful jaws and 40 teeth will grab hold and loosen
from a variety of angles without slipping. Tired of burning yourself? GATER JAWS™ with its long
length (23 inches) has the ability to reach under
and around hot manifolds and remove filters with
ease.You’ve never seen a wrench like GATOR JAWS™. It has no equal. The most versatile on the market. |
 |
Innovative Products of America Metric Multi-Wrench INN7901MTX
• The Multi-Wrench™ oil wrench has two swivel heads, each with four sockets.
• It has been designed primarily to serve the oil changing industry, but it also has many other great uses.
• For oil drain plugs 12mm-19mm.
• Fits 95% of all drain plugs on vehicles today.
• Two rotating swivel socket heads (ASME spec).
• Each socket clicks into place with size laser-etched on each socket.
• Unique swinging handle is specially designed for consistent and proper tightening of an oil drain plug.
• Handle comes with an earth magnet of 11 lbs. Holding force, so you can stick the wrench to any metal surface and not lose it.
|
 |
K-D Tools Universal Oil Filter Wrench KD 190
Wrench removes oil filters 3-7/16 to 3-3/4" (87 to 95mm) in diameter. Its positive grip lets you exceed normal torque requirements. The band will not puncture or crush filter. |
 |
K-D Tools Fuel and Oil Filter Wrench KD 192
Wrench removes gasoline and oil filters 2-1/4 to 2-9/16" (57 to 65mm) in diameter. Design prevents crushing of the filter case. |
 |
K-D Tools Truck and Tractor Oil Filter Wrench KD 2010
Tool removes oil filters 4 to 4-3/8" (102 to 111m) in diameter found on most tractors and trucks. Positive grip lets you exceed normal torque requirements. Band will not crush filters. |
 |
K-D Tools Square Drive Oil Filter Wrench KD 2029
For hard-to-reach areas, use this wrench in place of 190 to remove filters 3-7/16 to 3-3/4" (87 to 95mm) in diameter. To use, turn filter with 3/8" square drive tools. Band will not crush filter. |
 |
K-D Tools Wide Heavy Duty Oil Filter - 4.12" to 5" in Diameter KD 2320W
• Wider needed for thinner cans and more strength
• 3" wide bands for added strength and increased grip area
• Wrenches are designed for high torque requirements of truck filters and used with 1/2" square drive tools |
 |
K-D Tools Heavy Duty Oil Filter Wrench, 4-21/32 to 5-5/32" KD 2321
Wrenches are designed for high torque requirements of truck filters and used with 1/2" square drive tools. They have 3" wide bands for added strength and increased grip area.
Removes Truck Oil Filters from 4-21/32 to 5-5/32" (118 to 130mm) in Diameter |
 |
K-D Tools Heavy Duty Oil Filter Wrenches, 5-5/32 to 5-21/32"
KD 2322
Removes Truck Oil Filters from 5-5/32 to 5-21/32" (130 to 143mm) in Diameter |
 |
K-D Tools 3" End Cap Oil Filter Wrench KD 2790
Specially designed wrench removes and installs hard-to-reach 3" (76mm) oil filters with a 15-flute end. It fits various flute designs found on AC/Delco, Fram, Wix, STP, NAPA, Sears, Gard, Montgomery Ward, VW, Motorcraft and other filters. Use with 3/8" square drive tool or a 1" wrench. Durable steel wrench is zinc plated to resist rust. |
 |
K-D Tools 3-3/4" End Cap Oil Filter Wrench KD 2991
Wrench removes and installs 3-3/4" (95mm) diameter filters with 15-flute ends. It is designed for use with a 3/8" square drive tool or a 1" wrench. Tool is zinc plated to resist rust. Be sure fluted end of filter matches wrench |
 |
K-D Tools Swivoil™ Filter Wrench 3-1/2" to 3-7/8" KD 3082
Wrenches are made of high-quality steel with a zinc-plated yoke and a blackened band for resistance to rust and corrosion. The Plastisol-dipped handle will not slide off during use. Even hard-to-reach oil filters will come off easily with this swivel-handle oil filter wrench. The unique yoke and link assembly allows a good grip, but will not crush the filter. Wrenches' swivel tension is adjusted easily by using the nut and bolt on the handle.
Diameter Range: 3-1/2" to 3-7/8" (88.9mm to 98.4mm) |
 |
K-D Tools Swivoil™ Filter Wrench 2-7/8" to 3-1/4" KD 3083
Wrenches are made of high-quality steel with a zinc-plated yoke and a blackened band for resistance to rust and corrosion. The Plastisol-dipped handle will not slide off during use. Even hard-to-reach oil filters will come off easily with this swivel-handle oil filter wrench. The unique yoke and link assembly allows a good grip, but will not crush the filter. Wrenches' swivel tension is adjusted easily by using the nut and bolt on the handle.
Diameter Range: 2-7/8" to 3-1/4" (73mm to 82.5mm) |
 |
K-D Tools Nylon Strap Oil Filter Wrench KD 3149
Use wrench on oil filters up to a 6" (152mm) diameter. Strong nylon belt will not slip. Use with 1/2" square drive tools. |
 |
K-D Tools 65mm End Cap Oil Filter Wrench KD 3253
Wrench removes and installs 14-flute, 65mm factory oil filters on late-model Toyota Tercel, MR2, Celica and 1988 Camry. Use with a 3/8" drive tool or a 1" wrench. |
 |
K-D Tools Universal 3-Jaw Oil Filter Wrench KD 3288
Remove all passenger car and light-duty truck spin-on type filters with this wrench. Sizes range from 2-1/2 to 3-3/4". Use with 3/8"square drive tool. |
|
|
K-D Tools Swivoil Filter Wrenches KD 3324
Wrenches are made of high-quality steel with a zinc-plated yoke and a blackened band for resistance to rust and corrosion. The Plastisol-dipped handle will not slide off during use. Even hard-to-reach oil filters will come off easily with this swivel-handle oil filter wrench. The unique yoke and link assembly allows a good grip, but will not crush the filter. Wrenches’ swivel tension is adjusted easily by using the nut and bolt on the handle.
• 2-1/2 to 3" (63.5mm to 76mm) |
 |
K-D Tools Oil Filter Wrench Pliers - Fixed Range 2-15/16" to 3-5/8" KD 3368
Pliers remove stubborn, on-tight filters. Unique double handle design allows for better leverage to bear down harder. Tool is forged for superior strength and plastisol coated handles provide a firm grip.
|
 |
K-D Tools Oil Filter Wrench Pliers - Fixed Range 2-3/4" to 3-1/8" KD 3369
Pliers remove stubborn, on-tight filters. Unique double handle design allows for better leverage to bear down harder. Tool is forged for superior strength and plastisol coated handles provide a firm grip.
|
 |
K-D Tools Adjustable Oil Filter Wrench Pliers KD 3508
Pliers cover a complete range of filter removal from 2" to 5" (50mm to 125mm) in diameter. Ratchet and lock mechanism allow for multiple settings for sure fit, eliminating slippage. Jaws are grooved for better holding of the filter. Forged for superior strength. Plastisol coated handles provide a firm grip. |
