 |
Channellock Code Blue 8 Piece Pliers Set CHACBR-8
• Laser-hardened cutting edges provide longer life and greater ease of cut.
• Polished high-carbon, drop-forged steel.
• Electronic coating to
prevent rusting.
• A Santoprene core with TPR-rubber overmold composites for durability, comfort and a secure grip.
• Includes: 430CB, 420CB, 369CB, 911CB, 909CB, 358CB, 318CB, 338CB. |
 |
EZ-Red 3 Piece Kiwi Plier Set EZR300CS
• Provides better alignment of the hand and forearm during grip exertion
• Gives a clear line of sight to the work being
performed
• Enjoy a more powerful grip with less effort
• Grips with air pockets to make the tool comfortable to use
• Hidden spring to open the pliers jaws for quick recovery and reaction
• Made from heat treated steel
|
 |
K-D Tools GearWrench 2 Piece Double X Pliers Set KD 82106
• Compound joint allows access with minimal handle movement
• Flush rivet for strength and narrow profile
• Dual dipped grips
• Aligned serrated tips for precision gripping
• Corrosion resistant Alloy Steel
• Includes: 13" Straight with 3" Jaw Capacity and 45° Needle Nose Pliers - 12.75" and 1.75" Jaw Capacity
|
 |
Knipex Double Angle 120º Long Nose Pliers KNI3881200A
• Double angle jaws (120º) allow easier access in confined work areas
• Serrated gripping surfaces provide a more secure grip
• Jaw tips provide flexibility to resist breakage
• Forged from oil-hardened chrome vanadium steel for greater strength
|
 |
Knipex Double Angle 90º Long Nose Pliers KNI3881200B
• Double angle jaws (90º) allow easier access in confined work areas
• Serrated gripping surfaces provide a more secure grip
• Jaw tips provide flexibility to resist breakage
• Forged from oil-hardened chrome vanadium steel for greater strength
|
 |
Knipex "Grabber™" Needle Nose Pliers - 8" KNI3891200
• Ideal for gripping small hoses, clamps, spark plug covers and other small components
• Grabber jaws are precision ground
• Made of vandium steel, oil hardened
• Plastic coated handles and polished head
• 8" overall length
|
 |
Knipex 8" Lever Action Center Cutter
KNI7101200
• Cutting edges separately induction-hardened (approx. 64 HRC) for longer tool life.
• Patented design allows easy cutting of hard, soft and piano wire.
• Cutting performance is twenty times higher than applied hand force due to lever action.
|
 |
Knipex Ultra High Leverage Diagonal Cutters - 7" KNI7401180
• Cutting edges induction hardened (64 HRC) and factory tested
• Fixed, forged-on axle rivet
• Designed for effortless cutting of piano, hard and soft wire
• Ergonomic design
• Plastic coated handles and polished head
• 7" overall length
|
 |
Knipex Ultra High Leverage Diagonal Cutters - 10" KNI7401250
• Cutting edges induction hardened (64 HRC) and factory tested
• Fixed, forged-on axle rivet
• Designed for effortless cutting of piano, hard and soft wire
• Ergonomic design
• Plastic coated handles and polished head
• 10" overall length
|
 |
Knipex Ultra High Leverage Diagonal Cutters with Angled Head - 8" KNI7421200
• 12 degree angled head
• Cutting edges induction hardened (64 HRC) and factory tested
• Fixed, forged-on axle rivet
• Designed for effortless cutting of piano, hard and soft wire
• Ergonomic design
• Plastic coated handles and polished head
• 8" overall length
|
 |
Knipex Ultra High Leverage Diagonal Cutters with Angled Head - 10" KNI7421250
• 12 degree angled head
• Cutting edges induction hardened (64 HRC) and factory tested
• Fixed, forged-on axle rivet
• Designed for effortless cutting of piano, hard and soft wire
• Ergonomic design
• Plastic coated handles and polished head
• 10" overall length
|
 |
Knipex 10" Ultra High Leverage Center Cutter KNI7491250
• Cutting edges induction hardened (approx. 64 HRC) and factory-tested.
• Fixed, forged-on axle rivet for durability under heavy use.
• Designed for easy cutting of hard, soft and piano wire.
• Made from Chrome Vanadium electric steel, oil-hardened and tempered.
• Cuts hardened and thick wires with less effort than equally long Diagonal Cutters due to cutting edges being in the center of the plier head.
|
 |
Knipex 8" Cable Shears with twin cutting edge patented KNI9511200
• For cutting copper and aluminum cables, single and multiple wires
• Not suitable for steel wire and hard drawn copper conductors
• Precision ground, hardened blades
• Clean and smooth cut without crushing and deformation
• Easy cutting with one-hand operation
• Initial and final cut (upper and lower blade) allows cables of up to 20 mm dia. to be cut
• Low hand force required due to favorable lever ratio and new blade geometry
• With guard
• Adjustable screw joint, self-locking
• Forged
• Special tool steel, oil-hardened and tempered
|
 |
SK Hand Tool PLIERS DIAG 6 SK 15016
|
 |
SK Hand Tool 6" Curved Chain Nose Pliers without Cutter SK 16315
Length (inch.): 6 |
|
|
SK Hand Tool 7" Chain Nose Pliers with Cutter SK 17817
• 7" overall length.
• Needle nose with cutter. |
 |
SK Hand Tool 8" Duckbill Pliers with Serrated Jaws SK 17828
Length (inch.): 8 |
 |
SK Hand Tool 7" Extra Long Straight Needle Nose Pliers SK 17830
SK's high quality needle nose pliers with extra long handles for added reach in confined spaces. These pliers also have strong, serrated jaws for superior gripping strength, and fully padded handles for optimal user comfort.
|
 |
SK Hand Tool 7" Extra Long 45 degree Angle Needle Nose Pliers SK 17831
SK's high quality needle nose pliers with extra long handles for added reach in confined spaces. These pliers also have strong, serrated jaws for superior gripping strength, and fully padded handles for optimal user comfort.
|
 |
SK Hand Tool 2 Pc. Extra Long Needle Nose Pliers Set SK 17832
SK's high quality needle nose pliers with extra long handles for added reach in confined spaces. These pliers also have strong, serrated jaws for superior gripping strength, and fully padded handles for optimal user comfort.
Set Contents: 7" Extra Long Straight, 7"Extra Long 45° Angle Needle Nose Pliers. Packaged in a pouch. |
 |
SK Hand Tool 5 Piece General Purpose Pliers Set SK 17835
5 piece set is made in the U.S.A. Assortment of pliers and cutters are useful for a variety of purposes. All tools features plastic cushion grip for increased user comfort.
Set Contents: 6" Combination (Slip Joint) Pliers; 7", 10" Tongue and Groove Pliers; 7" Chain Nose Pliers with Cutters: 7" Heavy Duty Angled Diagonal Cutter. Packaged in a pouch. |
 |
SK Hand Tool 2 Pc. XXL Long Reach Compound Joint Pliers Set SK 17850
• Easy access with minimal hand movement.
• Flush-riveted joints provide an extra narrow profile.
• Perfectly aligned jaws with serrated tips yield precision gripping.
• Alloy steel durable and corrosive resistant
• Double dipped handle coatings provide comfort and control.
• XXL Reach Pliers are 13" long (see SK 17854 for standard long reach)
• Includes Needle Nose and 45 degree bent nose XXL compound joint pliers. |
 |
SK Hand Tool XXL Reach Straight Needle Nose Compound Joint Pliers - 13" SK 17851
When you need an extra long reach in a narrow space, SK's Long and XXL Reach Pliers are the right tool for the job. Made of alloy steel, these pliers are durable and corrosive resistant. The length provides one of the longest reach available in tight and confined spaces. These pliers have flush-riveted joints providing extra narrow profile, and perfectly aligned jaws with serrated tips for precision gripping. The handles are double dipped for control and comfort. Provides extra long reach in narrow spaces.
|
 |
SK Hand Tool XXL Reach 45 Degree Bent Nose Compound Joint Pliers - 13" SK 17852
When you need an extra long reach in a narrow space, SK's Long and XXL Reach Pliers are the right tool for the job. Made of alloy steel, these pliers are durable and corrosive resistant. The length provides one of the longest reach available in tight and confined spaces. These pliers have flush-riveted joints providing extra narrow profile, and perfectly aligned jaws with serrated tips for precision gripping. The handles are double dipped for control and comfort. Provides extra long reach in narrow spaces.
|
 |
SK Hand Tool 2 Pc. Long Reach Compound Joint Pliers Set SK 17854
• Easy access with minimal hand movement.
• Flush-riveted joints provide an extra narrow profile.
• Perfectly aligned jaws with
serrated tips yield precision gripping.
• Alloy steel durable and corrosive resistant
• Double dipped handle coatings provide comfort and control.
• Pliers are 9.5" long (see SK 17850 for XXL long reach)
• Includes Needle Nose and 45 degree bent nose XXL compound joint pliers. |
