 |
Actron Inductive Timing Light (Non-Adjustable) ACTCP7527
• All metal inductive pickup
• Super bright Xenon flash
• One touch control
• Durable, plated ABS housing
• Heat resistant over molding on battery clips
• Detailed instruction manual included
• One year warranty
|
 |
Actron Dial Advanced Timing Light ACTCP7528
• All metal inductive pickup
• Super bright Xenon flash
• One touch control
• Durable, plated ABS housing
• Heat resistant over molding on battery clips
• Detailed instruction manual included
• Adjustable knob measures centrifugal, vacuum and computer advance
• One year warranty
|
 |
Actron Digital Timing Light ACTCP7529
• Microprocessor-controlled circuitry
• LED tachometer display reads 0-9999 RPM advance display indicates to 1/10
• Unique flashlight feature
• 2/4 cycle and RPM/advance lights
• All metal inductive pickup
• Super bright Xenon flash
• One touch control
• Durable, plated ABS housing
• Heat resistant over molding on battery clips
• Detailed instruction manual included
• One year warranty
|
 |
Electronic Specialties Digital Clamp-On Tachometer ESI325
• Easy RPM measurements with clamp-on inductive pick-up
• Accurate engine RPM measurements (600-12,000 RPM) for 1,2,3,4,5,6,7,8 cylinders and 2 or 4 cycles
• Larger 2000 count LCD display shows; RPM, function, data hold indication and low battery indication
• Very useful tool for tune-up and other diagnostic work |
 |
Electronic Specialties Lazer Photo Tachomter - Non-Contact ESI330
• Simply aim the highly-visible light beam at a reflective mark placed on a rotating device, push the button and the RPM reading is immediately displayed. No contact with the shaft or wheel is necessary.
• Easy and accurate measurement of RPM in almost any environment.
• Range up to 6 feet from target.
• Get RPM on most engines, including coil-on-plug and diesel engines where conventional inductive tachometers can not be used.
• Other uses include
generators, compressors, industrial engines and equipment, fans, gears, and more.
Features:
• RPM Range - 0 to 99,999 rpm
• Resolution - 0.1 rpm (0 to 1,000 rpm) 1 rpm (over 1,000 rpm)
|
 |
Electronic Specialties Pro Laser Photo No-Contact Tachometer
ESI332
New pro model Photo Tach with high intensity laser beam. Laser method allows for longer detection distance, up to 6 feet away, resulting in superior performance over infrared models. Also features max/min memory and continuous backlit LCD display. Great tool for a variety of RPM applications.
• RPM Range - 0 to 99,999 rpm
• Resolution - 0.1 rpm (0 to 1,000 rpm) ,1 rpm (over 1,000 rpm)
|
 |
Electronic Specialties Reflective Tape for #330 and #332 ESI654
• 10 pack of reflective tape for ES brand photo tachometers - #330 and #332 |
 |
Ferret Instruments Digital Tach-Advance Timing Light FER84
PATENTED ELUMINATOR OPTICS
Has several times the strobe brightness of typical timing lights. Keeping the large
bright spot on the mark is easy.
INDUCTIVE SPARK PICKUP
Rugged and easy to hookup. Molded from reinforced, high temperature, solvent resistant plastic. Strongly discriminates between spark pulses and noise. Fits up to
8mm wire. Plugs in for easy replacement.
POWER EFFICIENCY
High efficiency regulated power conversion lets Ferret lights run cooler and last longer than other timing lights.
POWER INPUT CLIP LEAD PAIR
Has neoprene insulation, 16 gauge copper wire, and sturdy insulated clips.
HOUSING DURABILITY
Constructed of impact resistant and electrically insulating plastic for survival in the shop environment. Shaped with a
narrow barrel for light projection between engine belts and brackets. Designed with a comfortable handle grip and compact size for ease of use and storage.
This is the first choice for modern engine timing measurements. The back panel LED display shows RPM when the flash is off, and degrees advance when flashing.
|
 |
K-D Tools Distributor Clamp Wrench KD 104
Reach around obstructions to turn the distributor lock nut with this double-ended wrench. It fits 1/2 and 9/16" lock nuts. Use an adapter to join wrenches or attach the wrench to a 3/8" ratchet or extension. |
 |
K-D Tools Spark Plug Terminal Pliers KD 135
Safely remove spark plug cables and prevent cable damage. Pliers' handles and jaws are coated with a heavy-duy plastic for a sure grip. |
 |
K-D Tools Spark Plug Gap and Feeler Gauge KD 164
Use to set measure spark plug gaps plus other ignition clearances from 0.010 to 0.045" (0.254 to 1.143mm). Six wire gauges check spark plug gaps and 12 straight blades check other clearances. It includes a double-ended electrode tool for easy adjustments. Blade lengths: 3-5/16" long |
 |
K-D Tools Spark Plug Gap Wire Gauge KD 165
Gauge measures spark plug gaps from 0.015 to 0.045" (0.381 to 1.143mm). Double-ended tool is included for adjusting electrodes. |
 |
K-D Tools Spark Plug Gap Wire Gauge KD 166
Use gauge to measure spark plug electrode gaps from 0.025 to 0.045" (0.635 to 1.143mm). Gauge includes 2 electrode-adjusting tools.
|
 |
K-D Tools Ignition File KD 2153
Use tool to file ignition points and other small objects. The thin blade has a fine grid on both sides and is ideal for removing carbon from points. |
 |
K-D Tools Spark Plug Gap Gauge KD 2327
Gauge measures spark plug electrode gaps on gap plugs from 0.040 to 0.080" (1.016 to 2.032mm). It includes 2 electrode-adjusting tools. |
 |
K-D Tools 5.5mm Ford Distributor Module Socket KD 3197
Easily remove and replace mounting screws on Ford ignition modules that are attached to the distributor. The module can be replaced without removing the distributor. Use it with 1/2" open or box wrench or 1/4" square drive 1/2" socket. The socket is plated for corrosion resistance. |
 |
K-D Tools Spark Plug Gap Gauge KD 3293
Circular coin-type ramp gauge easily measures spark plug gaps from 0.020 to 0.100" (0.635 to 1.143mm) |
 |
Lisle Spark Plug Wire Puller LIS51250
A simple yet effective tool for disengaging spark plug boots. Tool performs well in difficult areas such as recessed and obstructed plugs. Square shaft
prevents slipping. Thick plastic handle prevents electric shock and provides greater pulling power. |
 |
Lisle Spark Plug Wire Puller LIS51500
Nylon stops the shocks and beats the heat and burns. Helps you pull spark plug wires quickly, easily and without damage to the wire or rubber boots.
|
 |
Lisle Spark Plug Wire Puller - Adjustable LIS51750
Pliers adjust to 5 different positions allowing easier access to spark plug boots. Specially shaped, cushioned jaws grip the boot straight on or from the side.
Plastic handle grips prevent shock. |
 |
Lisle Spark Plug Pliers LIS52990
• Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.
• Specially shaped, cushioned jaws grip the boot straight on or from the side.
• Plastic handle grips help prevent shock. |
 |
Lisle Ignition Module Wrench for Ford LIS64650
For 7/32" hex retaining bolts on Ford Ignition Module. May be turned by hand or with 1/2" wrench. |
 |
Lisle Spark Plug Gapper LIS67800
For standard ignitions. |
 |
Lisle Spark Plug Gauge and Gapper - Coin-Type LIS67870
Gauges and gaps all types of spark plugs from 0.20" to .100" (.50mm to 2.53mm). Tapered edge for gauging spark plugs. Specially designed hole with flange adjusts side wire of plug without pressuring center electrode. |
 |
OTC Advance Timing Light OTC3365
• Professional Advance Timing Light allows accurate adjustment of base and advance timing reading
• Adjustable knob measures centrifugal, vacuum and computer advance
• On/off touch control
Standard features:
• All metal inductive pickup
• Reflected super bright Xenon flash
• Removable leads with positive twist lock connector
• One touch control
• Durable, plated ABS housing with over molded grips
• Heat resistant over molding on battery clips
• Blow molded case included |
 |
OTC Digital Timing Light OTC3367
Professional Digital Timing Light has advanced features with a bright LED screen and mode indicator lights.
Unique features:
• Microprocessor-controlled circuitry
• LED tachometer display reads 0-9999 RPM
• LED advance display indicates to 1/10
• Unique flashlight feature
• 2/4 cycle and RPM/advance lights
• Up and down scroll buttons
Standard Features:
• All metal inductive pickup
• Reflected super bright Xenon flash
• Removable leads with positive twist lock connector
• One touch control
• Durable, plated ABS housing with over molded grips
• Heat resistant over molding on battery clips
• Blow molded case included |
 |
Sheffield Research/GTC SmarTach Plus Digital Tachometer/Secondary Ignition Voltage Tester SR TA100
The TA100 is two instruments in one - a professional microprocessor based contactless digital tachometer and secondary ignition voltage tester, which allows quick testing and diagnostics of the engine at a fraction of the time and cost of other equipment.
Wireless Digital Tachometer Features:
The tachometer function works by sensing and analyzing the radio emissions of the ignition systems to then show accurately the speed (in RPM) of the engine.
• No sighting of rotating parts or hook-up required
• Works on DIS, conventional, magneto and most ignition systems
• For 1 to 12 cylinders and 2 and 4 cycles engines
• Measures from 200 to 20000 RPM on a 4-1/2 digits display
• Advanced microcontroller technology yields +/- 0.5% accuracy
• Auto power off
Secondary Ignition Voltage Tester Features:
Secondary ignition voltages testing and measurement are performed by simply hooking the sensor at the tip of the TA100 antenna to the spark plug or coil wire under test.
• Instant digital readings from 0 to 40000 Volt
• Special antenna sensor allows quick hook-up to spark plug and ignition coil wires
• No ground wire connections required, for fast troubleshooting
• Multiple diagnostic applications described in comprehensive User's Handbook
• Auto power off, comes with battery |
 |
Tool Aid Spark Plug Cleaner TA 18500
Cleans any size spark plug quickly and effortlessly with internally controlled abrasive blasting. Uses ordinary air line pressure. Compressed air flows through special venturi mixing with abrasive to thoroughly clean spark plugs like new. Lever valve on outside of unit allows for blasting with abrasive/air mix or pure air only. Abrasive material is included and is silica free. Recommended air line pressure is 70-80 PSI; maximum 90 PSI. Instructions provided. |
 |
Tool Aid Silica Free Abrasive - 1-1/2 Lb. Bag TA 18530
Perfect for use in spot blasters and spark plug blasters. Excellent for removing rust, carbon and paint. While this contains no silica, eye, respiratory, and body protection should still be worn.
• 1-1/2" bag |
 |
Thexton Ford Distributor Gear Installer and Remover THE415
Works on all Ford vehicles with TFI-IV ignition systems, 1983 and up. Removes and re-installs distributor gear so Hall Effect Switch may be serviced. Steel tool won't stress gear teeth or damage gear and shaft. |
