Engine Hoists and Engine Stands

Click here to compare prices.

AMEPP7134 American Power Pull Engine Lifting Sling AMEPP7134
For lifting automotive engines. Bolts to motor mounting holes. 600 lbs. lift rating.
AMEPP7136 American Power Pull Engine Lift Combo AMEPP7136
• Use either slip hooks or engine bolt attachments
• Lifts up to 600 lbs.
• Use as a sling or engine lift
• Use with American Power Pull Cable Pullers or Chain Hoists
LIS48260 Lisle Engine Tilter for GM FWD Transverse Mounted Engines LIS48260
• Tilts and holds GM FWD Transverse Mounted Engines for repair.
• This tool attaches to the engine and engine mount to pull the engine forward. Makes servicing spark plugs, hoses, oxygen sensor, and ignition components much easier. Holds the engine safely in place during service.
OTC1725 OTC Three Point Engine Support Bar OTC1725
Unique, innovative design featuring...
• Cutting edge, patent pending design self-centers load to prevent tipping on inclined surfaces.
• Smooth sliding legs adjust easily to different vehicle widths.
• PVC-coated support legs don't scratch vehicle surfaces.
• "Quick Connect" third-point bar makes setup a snap.
• Spinner handle enables lightning fast adjustment.
OTC1735A OTC Heavy-Duty 2,000 lb. Motor-Rotor Repair Engine Stand OTC1735A
• Handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery.
• Twin-post design, featuring laterally adjustable, 3-position outboard support; provides an extremely stable work-holding unit.
• The 50:1 ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. Easily maneuvered when loaded.
• Locking rear wheels anchor stand in position.
• Covered by OTC Lifetime Marathon Warranty
OTC1750A OTC 6000 lbs. Revolver Diesel Engine Stand OTC1750A
• 96 to 1 ratio worm and gear set rotates components a full 360°; handle locks in any position.
• Includes universal mounting plate for use with individual engine adapter plates.
• Weight: 722 lbs., 0 oz.
OTC1812 OTC 6,000 lb. Load Tilter OTC1812
• Improved design over conventional spreader bars
• Carriage on main support beam moved by turning lead screw; this permits fine adjustment of the tilt angle of component being lifted
• Turn lead screw manually or with air-powered tools
• Spreader bar adjustment secured with locking bolts
• Made in the U.S.A. and covered by the Lifetime Marathon Warranty
• Max. lifting capacity: 6,000 lbs.; distance between hooks: min. 30", max. 46"; chain grade: 80
• Shipping Weight: 69 lbs.
OTC1814 OTC 6,000 lb. Capacity Heavy-Duty Mobile Floor Crane OTC1814
• 6,000 lb. capacity crane with electric/ hydraulic pump (115V) with remote motor control
• Three boom positions give capacities of 4,000, 5,000, and 6,000 lbs. to handle the biggest engines, and often the transmission right along with the engine!
• Usable reach is almost 92".
• Boom swivels for vertical and lateral positioning; legs extend to straddle the biggest tires.
OTC1819 OTC 2,200 lb. Capacity Heavy-Duty Floor Crane OTC1819
• Space-saving fold-away feature for storage.
• Adjustable leg spread for "close-in" work.
• Telescoping boom extension for added reach.
• Equipped with 2-speed hydraulic hand pump.

• 16-7/8" lifting chain
OTC1820 OTC 4,400 lb. Capacity Heavy-Duty Floor Crane OTC1820
• Space-saving fold-away feature for storage.
• Adjustable leg spread for "close-in" work.
• Telescoping boom extension for added reach.
• Equipped with 2-speed hydraulic hand pump.

• 18-3/8" lifting chain
OTC2004 OTC Stinger 4,000 Lb. Folding Engine Crane OTC2004
• A very versatile floor crane for almost any lifting job
• Folds up for easy storage
• Reach: 25" to 46"
• Features 3-1/2" swivel casters and 5-7/8" fixed wheels for easy maneuverability
• 2 Year Manufacturer's Warranty
OTC2012A OTC Stinger 1250 lb. Capacity Engine Stand with Tool Tray OTC2012A
• Heavy duty mounting plate and adapter arms for servicing light truck and car engines.
• Heavy-duty four-wheeled base increases stability.
• Wide 'mouth' base opening works with most mobile engine cranes.
• Fixed polyurethane back wheels; poly swivel castors on front for smooth travel.
• 24" handle makes easy work of rotating the engine 360 degrees; hitch pin locks engine in place.
• Built-in tool tray keeps frequently needed tools right close to work area.
• OTC 2 year warranty.
OTC4305 OTC 1500 lb. Engine Load Leveler OTC4305
• Horizontal tilt design with built-in handle.
• 1,500 lb. capacity.
OTC4324 OTC Stinger Engine Support Bar OTC4324
• 1100 pounds capacity.
• Adjustable range: 57" x 27" width.
• Features two hook assemblies for ease of use.
• Tubular steel construction for long life.
• Rubber padded support legs ensure stability during use.
• Includes two 36" chain assemblies.
OTC528859 OTC JOHN DEERE 400 & 500 SERIES OTC528859
ADAPTER
OTC528865 OTC CASE 148 TO 207 SERIES & 251 OTC528865
TO 504 SERIES ADAPTER
SUN5040 Sunex International 4 Ton Capacity H.D. Long Ram Jack (Round Bottom) SUN5040
• Electrostatically painted to prevent corrosion
• Ideal use for extra long power stroke requirements
• Slow release feature
Specifications:
Capacity (Tons): 4
Power Lift (In.): 20-3/4
Closed Height (In.): 24-1/4
Raised Height (In.): 45
Shipping Wt. (Lbs.): 29
SUN5207 Sunex International Engine Transverse Bar with Arm Support SUN5207
• Supports Engine weighing up to 700 lbs. (317.5 kg).
• Designed for easy and safe removal of transaxle in front wheel drive vehicles.
• Adjustable transverse bar and two hook screws adjustable to 14".
• Fully adjustable support arm for off-center loads.
• 2 pieces - 1/8" braided steel cables included.
• Expands safely from 34.6" up to a full 61".
SUN5208 Sunex International 3/4 Ton Tilting Engine Sling SUN5208
• Designed for use with standard engine hoist hook.
• Acme threaded tilting shaft for strength and ease of adjustment
• Includes 4 chains and bolt-thru angle for easy mounting to most engines.
SUN5218 Sunex International 2 Ton Capacity Breakdown Engine Crane - Low Clearance Design SUN5218
• Low 4" clearance gets under more cars without requiring jacking up of the vehicle.
• 3-1/2" Casters and 4" Front Wheels
• Push handle with rubber grips for ease of maneuverability
• 4,000 lb. rated capacity.
• 4 Position boom
• Heavy duty, slow release
• 8 Ton power unit with quick lift feature
• Packaged in 2 boxes
SUN8300DP Sunex International Oil Drip Pan for Geared Engine Stand (SUN8300G) SUN8300DP
• Fits over base frame of Sunex 8300G geared engine stand
• Easily removed for emptying
• Ideal when working on engines to keep oil and grease off the shop floor
• Made of ABS plastic
SUN8300GA Sunex International Geared Engine Stand - 1,000 Lb. SUN8300GA
• 63:1 worm gear ratio allows easy rotation of engine
• Self-locking in any rotated position
• Folds for easy storage
• Heavy-duty fixed rear castor and swivel locking front castors
• Oil Drip Pan available separately (SUN8300DP)

Specifications:
Capacity: 1,000 Lbs.
Length: 34"
Front width: - 20.5"
Rear width: - 36.5"
Height (unfolded): 36"
Height (folded): 21"