Wiring, Crimping, Soldering Tools

Wiring, Crimping, Soldering

To search this page press CTRL + F on your key board.
To search our database use the Find A Tool link to the left.
To compare prices click here.

	3M Automotive Products Scotchlok™ Vinyl Insulated Butted Seam Male Disconnect 3M 22997 • This terminal has a wire range of 16-14 AWG and has case quantities of 500 per case. • The disconnects are attached to mating part by tongue of female part slipping over male tab. The use of dents and rolled edges on female part provides excellent holding force while allowing easy and quick disconnect.
	3M Automotive Products Heat Shrink Tubing Kit - 133 Pc. 3M 37677 • A versatile assortment of flexible polyolefin heat shrink tubing (FP301) in a variety of sizes and colors. • Seven colors: Black, White, Clear, Red, Blue, Yellow, Green Kit contents in an organized case: 3/32" - 5 each of 7 colors - 35 pieces, 1/8" - 4 each of 7 colors - 28 pieces, 3/16": 3 each of 7 colors - 21 pieces, 1/4": 3 each of 7 colors - 21 pieces, 3/8": 2 each of 7 colors - 14 pieces, 1/2": 2 each of 7 colors - 14 pieces
	3M Automotive Products Electrical Tape - 3/4" Vinyl 60 yd. 3M 49656 A good quality, economical general purpose insulating tape, Scotch® 1710 Vinyl Insulating Tape's elastic backing ensures easy, moisture tight conformation to irregular surfaces. It combines the flexibility of a PVC backing with good electrical insulating properties to provide primary electrical insulation for splices up to 600V. Abrasion-, corrosion-, and UV-resistant, it makes a good protective jacketing. UL listed, it resists alkalis and acids, and is flame-retardant. This 7-mil tape offers good resistance to moisture, alkalis, acid, and varying weather conditions (including ultraviolet).
	Channellock Crimping Tool CHA909 • For crimping and cutting of both insulated and non-insulated solderless connections and terminals.
	Channellock Code Blue 9.5" Crimping and Cutting Tool CHA909CB • Laser-hardened cutting edges provide longer life and greater ease of cut. • Polished high-carbon, drop-forged steel. • Electronic coating to prevent rusting. • A Santoprene core with TPR-rubber overmold composites for durability, comfort and a secure grip. • 9-1/2" crimping and cutting tool. • For crimping and cutting of both insulated and non-insulated solderless connections and terminals.
	Innovative Products of America Large 2in1 Wire Cutter/Stripper INN7896 • Cuts with one end - strips with the other! • One tool does it all! • Adjusts to wire sizes from 10AWG to 14AWG • Use on soft copper (electronic) wire only • Catch, hold and strip wire in one quick motion • Head is full flush cutting and low profile • Jaws are made from surgical steel
	K-D Tools Electrical Wire Stripper and Crimper KD 2162 This all-purpose electrical tool includes a pliers-type nose, crimper, wire cutter, stripper and bolt cutter. The nose has a serrated jaw to pull, loop and twist wire. The crimper works on 7 and 8mm noninsulated terminal and electrical 22-20 to 22-10 insulated terminals. Wire cutters and strippers at the front strip have wire sizes 22-20 and 22-10. The bolt cutter works on bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 10-24. The tool features comfortable cushion-grip handles.
	K-D Tools 3 PC. PRO. MINI WIRE KD 3794 CUTTER/STRIPPER/CRIMPER SET
	Knipex 4-in-1 Electricians Pliers KNI1301614 • Great multi-function pliers for electrical work • Strips 10, 12 and 14 AWG • Induction hardened cutting edges (60HRC) for easy cutting of medium-hard and soft wire • Integrated crimper for crimping end sleeves (ferrules) • Serrated gripping surfaces provide a more secure grip • Forged from oil-hardened chrome vanadium steel for greater strength
	Lisle Electrical Connector Separator LIS13120 • Quickly disconnects electrical connectors without damage • Works on Weather Pack and other automotive electrical connectors • Engage tool tip behind the connector clip. Push or pull to disconnect. The tool is double ended to fit different access angles.
	Lisle Terminal Tool For GM Systems LIS14900 Designed for Pack-Con and Weather-Pack terminals found on GM C3 Systems. Tool can also retrieve trouble codes from engine computer on late model GM vehicles.
	Lisle Terminal Tool LIS56500 Eliminate Damaged Wires and Terminals. Lisle Wire Terminal Tools are designed to remove wires from terminals without damage to either. 56500 prongs depress the "barbs" on conventional terminals. Tool can also retrieve trouble codes from engine computer on late model GM vehicles.
	Master Appliance ProSeal Heat Shrink Wire Terminal Assortment - 115 Pc. MST10600 • Kit contains 20 items, 115 assorted connectors packed in a plastic storage case. • ProSeal connectors are "Crimp-and-Heat-Seal" style for strong and water resistant connections. • Easy-to-use. • Color-coded. Kit Contents: RING TERMINALS (5) 18-20 AWG, Ring Terminal, #6 Stud, Red (5) 18-20 AWG, Ring Terminal, #10 Stud, Red (5) 14-16 AWG, Ring Terminal, #8 Stud, Blue (5) 14-16 AWG, Ring Terminal, #10 Stud, Blue (5) 14-16 AWG, Ring Terminal, 1/4" Stud, Blue (5) 14-16 AWG, Ring Terminal, 3/8" Stud, Blue (5) 10-12 AWG, Ring Terminal, #8 Stud, Yellow (5) 10-12 AWG, Ring Terminal, #10 Stud, Yellow (5) 10-12 AWG, Ring Terminal, 1/4" Stud, Yellow (5) 10-12 AWG, Ring Terminal, 3/8" Stud, Yellow SPADE TERMINALS (5) 18-20 AWG, Spade Terminal, #10, Red (5) 14-16 AWG, Spade Terminal, #10, Blue (5) 10-12 AWG, Spade Terminal, #10, Yellow BUTT CONNECTORS (10) 18-20 AWG, Butt Connector, Red (10) 14-16 AWG, Butt Connector, Blue (10) 10-12 AWG, Butt Connector, Yellow INSULATED COUPLERS (5) 18-20 AWG, Female Coupler, 1/4" Tab, Red (5) 14-16 AWG, Female Coupler, 1/4" Tab, Blue (5) 18-20 AWG, Male Coupler, 1/4" Tab, Red (5) 14-16 AWG, Male Coupler, 1/4" Tab, Blue
	OTC Stinger Angle-tip Relay Pliers OTC4493 • Designed to remove and install relays, which are usually located in confined, hard-to-reach areas. • Specially coated tips offer a solid grip on the relay.
	SK Hand Tool 6" Stripping Pliers SK 7695 Length (inch.): 6
	SK Hand Tool 8" Crimping/Stripping Pliers SK 7698 Length (inch.): 8
	Schley Products Relay and Fusible Link Pliers SP 98110 This unique tool has been developed for removal and installation of relay and fusible links on many later automobiles. These square and rectangular shaped relays and fusible links are usually grouped close together without any room for removal by hand. This tool has been engineered grip the corners of the relay or fusible link even in the tightest spots. Specially coated tips protect the part during removal and installation. Pliers have soft grip handles and are slip jointed to allow for multiple size usage.
	Steelman 19 Pc. Master Terminal Tool Kit STE95978 • Latest tools for new Volkswagen and Audi vehicles, plus special tools for coolant sensors, wiring harnesses and terminal blocks on Chrysler, Hyundai, KIA, Mitsubishi, GM and most other modern vehicles • Eliminates potential damage to wires or terminal blocks • Knurled finish handles for extra grip • Application chart included inside storage case • Handles individually marked for easy reference to application chart
	Tool Aid Professional Ratcheting Terminal Crimper TA 18900 • Ratcheting action ensures a perfect crimp every time. • Eliminates damaged or distorted terminals. • Crimps 10-22 gage insulated terminals. • Superior design and construction outperforms other crimpers. • Replaceable crimping jaws.
	Tool Aid Ratcheting Terminal Crimper Kit TA 18920 • Versatile kit includes 5 dies for virtually all uses. • Die sets quickly interchange for a wide range of applications. • Crimping tool has a steel frame with contoured grips. • Supplied in a durable, plastic, molded storage case with carrying handle. Applications: • Insulated terminals 22-10 AWG • Non insulated open barrel connectors 22-10 AWG • Fully insulated quick disconnect terminals with thinner wire barrels 22-10 AWG • Non insulated terminals 22-8 AWG • For miniature insulated rings, spade and butt splices 16-26 AWG
	Tool Aid Heavy Duty Automatic Wire Stripper TA 18950 • Three tools in one - strips, crimps and cuts. • Automatically self-adjusts to strip solid or stranded 10-26 gage wires. • Removes insulation without damaging the conductor. • Has adjustable stripping tension. • Crimps insulated and non-insulated terminals. • Cuts wire, fast, clean and smooth. • Steel construction with insulated plastic handles. • Easy to use with single hand action.
	Tool Aid Wire Stripper TA 19000 • Automatically adjusts to wire size. • Cuts and strips solid or stranded 12-22 gage wire. • Handles single or multiple conductor wire. • Easy to use - yields clean, nick-free results every time. • Not designed to strip Teflon or similar insulations.
	Vise Grip 8" Self-Adjusting Wire Pliers VIS2078300 • Strips wire from 10-24 AWG • Adjustable stopper controls the length of the core strip • Swivel knob micro-adjusts for gauges smaller than 20 AWG • Wire crimper crimps 10-22 AWG non-insulated, 10-22 AWG non-insulated and 7-9mm ignition terminals • Wire cutter extends versatility • ProTouch grips provide maximum comfort
	Weller Replacement Soldering Tips for D550 WEL7250W 2-Pack
	Weller Professional Soldering Gun Kit WELD550PK • 260 Watts • UL listed • Includes: D550 soldering gun with 1 soldering tip, 1 sealing tip, 1 cutting tip, flux brush, soldering aid tool and coil of lead free solder. • Packaged in a rugged plastic case • Soldering hints and tips booklet included

Copyright © 2008 All Rights Reserved. Trademarks and brands are the property of their respective owners.
DMS Tools is not responsible for typographical or photographic errors. Prices subject to change without notice.