 |
Ammco Brake Lathe Bench with Tool Board AMM2500
Heavy-duty bench specifically designed for brake lathes. Bench has chip collection funnel and bin to reduce mess and clean-up time. Built in organizers for adapters and parts under bench. Included upper tool board increases capacity for adapters and keeps most used adapters right at hand. |
 |
Ammco Brake Lathe Arbor - 1 Inch AMM3101
• Arbor - Cap. 100lbs. - Use With #3102 Arbor Nut - For Models 2002,3000,4000,4100,7000,7500,7700 |
 |
Ammco Combination Disc/Drum Brake Lathe AMM4000B
• The Classic, Best Selling Model 4000!
• Features twin cutters, boring bar, quick drum to rotor changeover, and two spindle speeds
Please Note: Adapters are not included, AMM 4000B should be ordered with Adapter Kit-B (AMM 900002B) or Kit-C (AMM 900003C) |
 |
Ammco Combination Single Speed Lathe for Brake Drums and Rotors AMM4000SP
The Ammco 4000 SP brake lathe is simplified for today's busy shops. It's more efficient than ever because it integrates single speed spindle and feed rates for one pass precision finishes. Technicians can turn standard work quicker and easier. The 4000 SP uses positive rake toolbits for quality cuts you can see, time after time. No one can offer you a more rugged lathe at such a competitive cost.
The result of this simplification is one of the most accurate, durable, and easy-to-use machines you could ever put in your shop. The 4000 SP also allows for lightning-quick drum-to-rotor changeover. And Ammco adapters (sold separately) can give you a complete package that lets you turn virtually any drum or rotor that comes through your shop.
Specifications:
• Floor Space Requirements: Width 48" (1219.20 mm) Depth 34.5" (901.70 mm)
• Electrical Requirements: Standard 115v AC, 20A @ 60 Hz, 1Ph
• Spindle and Crossfeed: Spindle Travel: 6.875" (175 mm), Spindle Speed: 100 RPM, Spindle Feed Speed: Drum 0.005 in/rev, Cross Feed Speed-Rotor: 0.002 in/rev
• Maximum Rotor Diameter: 14.5" (368.3 mm)
• Maximum Rotor Thickness: 1.875" (47.63 mm)
• Brake Drum Diameter: Minimum 6", Maximum 28"
• Maximum Drum Depth: 6.875" (175 mm)
• Maximum Load: Standard 1" Arbor, 100 lbs. (45.36 KG)
• Lathe Shipping Weight: 385 Lbs.
• Warranty: One Year Parts and 6 Months Labor
NOTE: Shown with optional work bench, chip tray, and tool peg board. These items are not included with the 4000SP. |
 |
Ammco 4100B Medium-Duty Brake Lathe AMM4100B
• Twin cutter tools and quick drum-to-rotor changeover.
• Adjustable spindle speeds allow for quick rough cut/finish cut settings.
• Infinitely adjustable spindle-feed gear box.
• Additional spindle travel to 9.875" (250.83mm).
• Ideal for medium-duty truck service.
Specifications
Rotor Diameter: 19.0"
Max. Rotor Face Width: 3.75"
Max. Rotor Thickness: 4"
Drum Capacity (Diameter): 6"-28"
Flywheel Diameter: 17.5"
Flywheel Face Width: 3.75"
Drum, Rotor, Flywheel Max. Weight: 200 Lbs.
Spindle Speed: 100/200 RPM
Rotor Feed Rate: .002"/.010"/REV
Drum Depth Up to 9.875"
Drum Feed Rate: 002" to .020"/REV
Motor: 1 HP
Shipping Weight: 480 Lbs.
Warranty: 1 Year
Spindle Bearings: Bronze Sleeve
Standard Tool Bits: Negative Rake
Arbor Taper: Double |
 |
Ammco Brake Drum Silencer Band AMM5280
• Band is 1-3/4" wide |
 |
Ammco Brake Lathe Accessories AMM6854
Knob - 3-Arm, Red |
 |
Ammco Negative Rake Brake Lathe Bits - 10 Pack AMM6914-10
• Carbide for long lasting performance
• Six cutting edges on each bit
• For use with Ammco Brake Lathes
• Comes with screws
|
 |
Ammco Brake Lathe Accessories AMM6914-2
Negative Rake for Lathe Models 1000, 2002, 3000, 4000, 4100, 7000 and 7700
• Package of two
|
 |
Ammco Negative Rake Brake Lathe Bits - 6 Pack AMM6914-6
• Carbide for long lasting performance
• Six cutting edges on each bit
• For use with Ammco Brake Lathes
• Comes with screws
|
 |
Ammco Positive Rake Brake Lathe Bits - 6 Pack AMM6918-6
• Carbide for long lasting performance
• Six cutting edges on each bit
• For use with Ammco Brake Lathes
• Comes with screws
|
 |
Ammco Silencer Band for Ventilated Rotors AMM6920
• Adjustable to fit most diameter ventilated rotors |
 |
Ammco Silencer Band for Non-Vented Rotors - 6.5" Dia., 2 Pk. AMM6921
• Silencer Band, Non-Vented - Rotor - 6.500" (165.10mm) Diameter - Package of 2 |
 |
Ammco Silencer Band for Non-Vented Rotors - 9.25" Dia., 2 Pk. AMM6922
• Silencer Band, Non-Vented - Rotor - 9.250" (234.95mm) Diameter - Package of 2 |
|
|
Ammco Brake Lathe Accessories AMM7996
Gear - Shear: and C -Clip - Standard with Models 4000, 4100 and 7500 |
 |
Ammco Ammco® Vehicle Coverage Adapter Kit "A" AMM900001A
• Ammco® brake lathes that were bought more than four decades ago are still in use today. You won't find faster, more accurate, more durable, or easier-to-use lathes anywhere. Ammco offers bench lathe adapter kits to fit a variety of needs. (Important: You must order one adapter kit with Ammco bench lathes) Select the one that best fits your shop.
• A Kit: Most car applications (standard and composite)
|
 |
Ammco Brake Lathe Adapter Kit-B AMM900002B
• For hub and hubless applications on most passenger cars and light trucks thru 1/2-ton, including composites |
 |
Ammco Brake Lathe Adapter Kit-C AMM900003C
• For hub and hubless applications on most passenger cars and light trucks thru 1-ton, including composities. |
 |
Ammco Ammco® Vehicle Coverage Adapter Kit "E" AMM900005E
• Ammco® brake lathes that were bought more than four decades ago are still in use today. You won't find faster, more accurate, more durable, or easier-to-use lathes anywhere. Ammco offers bench lathe adapter kits to fit a variety of needs. (Important: You must order one adapter kit with Ammco bench lathes) Select the one that best fits your shop.
• E Kit: Most car through 1 ton with double chuck (standard and composite) |
 |
Ammco Pressure Pads for 7075 - 2 Pk. AMM9183
• Pressure Pad, Replacement (Non-Asbestos) - Set of 2 |
 |
Ammco Adaptek™ Adapter Kit for Hubless Cars & Light Trucks AMM9310
• Adaptek™ adapters increase performance levels on most 1" arbor lathes and deliver a superior microfinish on drums and rotors, composite asn standard cast applications and most flywheels.
• Single setup, self-centering, with extra mass for maximum vibration damping, Adaptek™ adapters provide better results with less chatter.
• Includes AMM 9311 & AMM 9312 |
 |
Ammco Adaptek™ Adapter Kit for Hubless Trucks AMM9313
• Adaptek™ adapters increase performance levels on most 1" arbor lathes and deliver a superior microfinish on drums and rotors, composite asn standard cast applications and most flywheels.
• Single setup, self-centering, with extra mass for maximum vibration damping, Adaptek™ adapters provide better results with less chatter.
• For trucks up to 1-ton |
 |
Ammco Bits & Bands Box AMM95000048
• Convenient carry handle & hinged see through cover for instant inventory
• Divided compartments for organization
• Bottom of compartment labels show part number & quantity for easy re-ordering
• Adjustable compartment dividers for flexibility
Includes:
• (10) Negative rake, 10 pack
• (5) Negative rake, 2 pack
• (4) Red Knob
• (2) Shear gear
• (2) Rotor, silencer, large Solid
• (2) Rotor, silencer, small solid
• (2) Rotor, silencer, steel vented
• (4) Rotor, silencer, rubber vented
• (2) Drum, silencer band
• (2) Silencer pads
|
 |
Ammco Spring Silencer for Vented Rotors AMM9800
• Spring silencer includes four 5" springs |
 |
Kwik-Way Power Drive and Kwik-Lathe System KWI108000115
• Can be set up in minutes and operated by any technician with average skill and experience
• Ensures the rotor is always square to the caliper, producing an accurate machined surface that exceeds OEM specifications.
• The Power Drive (shown to the right) attaches quickly and easily and provides a constant speed that assures a consistent finish
• Can be used on “powered" or “non-powered wheels (with optional Power Drive attached)
• 115V/60Hz/1Ph |
 |
Kwik-Way Power Drive System for Kwik-Lathe KWI108000402
• Necessary for turning unpowered rotors while cutting rotors with an on-the-car lathe.
• Attaches quickly and the constant speed gear drive assures a consistent finish.
• 1750 RPM; 115V/60Hz/1PH motor
• Constant speed gear drive assures a consistent finish.
• Operating height is fully adjustable from 33" to 56"
|
 |
Kwik-Way Kwik-Lathe On-The-Car Brake Rotor Lathe KWI108000550
• Machine rotors on the vehicle and guarantees zero runout; bolts directly to the caliper spindle casting.
• Eliminates pedal pulsation, costly comeback & unhappy customers.
• Money saved by resolving and reducing customer complaints and comebacks will pay for this unit in a year or less!
• Comes with Extended Accessory Package to handle small imports, 1 ton 4x4s, plus a GM 11mm bolt kit - used on 90% of current GMs.
• Patented Kwik-Moun included for easier, faster lathe mounting.
• Note: To use on non-drive wheels, you will need a Power Drive System (KWI 108000402) |
